开云体育

Glad Rick got you fixed up. He's always treated me fairly. The hardest part about shipping 892x's to Rick is the packing and shipping costs. I have a box that has made a few trips back and forth to

Hello, Alberto.Go to /g/HP-Agilent-Keysight-equipment?In the files section. Here is a link that should take you right to

Hello Greg, I also happen to have my 8920A under repair, and I'd like to upgrade FW A.06.12 to a more recent one. Do you have any download links for later firmware? Thank you in advance. Alberto

Thanks, John?Sent from my Galaxy

Just to close the loop on this, I sent my 8921A to Amtronix.? Rick got it all fixed, and also replaced the electrolytics in the power supply, semi-affordably.? I'm happy. 73 Jeff n1kdo

Thanks everyone From the manuals , I think that G8RPI is correct, It would be a spectrum analyzer with a 5 KHz resolution on the screen. and a freq gen. Maybe also an audio gen and a freq counter in

usually that goes without a problem.? Some of the programs may need the larger memory though. Usually updating the memory is not an issue either.? The chips are still around as well, I would backup

Almost totally useless for analog radio work. At best you get a CW RF Generator and a fairly crippled spectrum analyser. They are not worth the space. The 8924C is another matter. Looks the same but

Hello, all. I have an early 8920a sn 3211Axxxxx with version A.6.11 firmware and option 005 (memory upgrade) and would like to upgrade the firmware to A.14.14. I have the eproms (dip type) already

George: Gosh, Sorry, it is the 8922M Yea the models are significantly different. Wally

Hi Wally Which flavour of 8922, there are a number of variants, most dedicated to GSM mobile work George G6HIG Dover UK

I have an HP 8935 and use it almost daily. I am wondering about the capabilities of the 8922 for use HF and VHF and UHF radio servicing , does anyone have any experience. I do not thin the 8922 can

I'm downsizing my equipment collection and don't really need 3 service monitors. So I've decided to sell my 8920B. It's in very good condition and has OPT055 so goes down to 400kHz. Send me a private

jyelmgren <jyelmgren@...> added folder */8920AB Power Supply Information Schematic*

I have a freind trying to write a Flash card for me and apparently the native files won't work, I need a binary image. I found a binary image of option 100, but none for option 001 and I suspect I

This is common issue to the 892X series including the 8920A and 8921A. If fitted with certain options they may require a jumper on the rear for the unit to be operational without the external

As an FYI for anyone looking for the answer on this - Yes, it appears that if your 8920B comes with the option that works with an 83206A (or I would assume any of the other test sets), then W13 will

Hi All, Cleaned off the bench and took 83206A off the 8920B - Thought it would be a good idea to run the diagnostic programs that are on the system ROM - Unit passes power self-tests but when running

7-zip has problems with older versions of the app.? I've seen it happen in winrar files too.? I'd recommend upgrading to the latest version and try again.? Guess how I know?? O:)

After maintenance, it can't run now. The input signal of ant port is too low to detect. These can only run after calibration. At present, I don't know how to solve them. Do you know,