开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. HP-Agilent-Keysight-Equipment
  2. Topics

Equipment rack rail C-clip nuts

[email protected]
 

Thought I'd ask the group:?

I'm looking for a source for the C-clip "speed nuts" used in Agilent/HP equipment rack rails, such as in the N4043A ( nee 1181B ) cart.? The part is an Agilent PN 0590-0804 "NUT-SHMET 10-32-THD .5-WD STL" and is a "support part for which Agilent does not own the design specifications" (which I read as available off-the-shelf someplace).?

Agilent wants 3.38 each (!) for them, and I suspect you guys who work with rack mount equipment know an online hardware store off the top of your head where one can buy a bag of them for something less.

Thanks in advance,

Don Cramer
Beaverton, OR
dmac1054us
 

Might try
Doug

--- In hp_agilent_equipment@..., donlcramer@c... wrote:
Thought I'd ask the group:

I'm looking for a source for the C-clip "speed nuts" used in
Agilent/HP
equipment rack rails, such as in the N4043A ( nee 1181B ) cart.
The part is an
Agilent PN 0590-0804 "NUT-SHMET 10-32-THD .5-WD STL" and is
a "support part for
which Agilent does not own the design specifications" (which I read
as
available off-the-shelf someplace).

Agilent wants 3.38 each (!) for them, and I suspect you guys who
work with
rack mount equipment know an online hardware store off the top of
your head
where one can buy a bag of them for something less.

Thanks in advance,

Don Cramer
Beaverton, OR
 

Those guys might have a minimum order. I just remembered that I have few
from a DEC's rack. They are square piece of metal, about 3/16 " thick with
10-32 thread cut and a spring retainer. If just few would do, I can put that
in mail for you.

Regards

Miroslav Pokorni

----- Original Message -----
From: "dmac1054us" <dmac1054@...>
To: <hp_agilent_equipment@...>
Sent: Wednesday, September 24, 2003 9:08 AM
Subject: [hp_agilent_equipment] Re: Equipment rack rail C-clip nuts


Might try
Doug

--- In hp_agilent_equipment@..., donlcramer@c... wrote:
Thought I'd ask the group:

I'm looking for a source for the C-clip "speed nuts" used in
Agilent/HP
equipment rack rails, such as in the N4043A ( nee 1181B ) cart.
The part is an
Agilent PN 0590-0804 "NUT-SHMET 10-32-THD .5-WD STL" and is
a "support part for
which Agilent does not own the design specifications" (which I read
as
available off-the-shelf someplace).

Agilent wants 3.38 each (!) for them, and I suspect you guys who
work with
rack mount equipment know an online hardware store off the top of
your head
where one can buy a bag of them for something less.

Thanks in advance,

Don Cramer
Beaverton, OR


To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...



Your use of Yahoo! Groups is subject to

 

Hello Don,
The old age does not lend itself to quick thinking. I just sent you an e
mail offering to send you few panel nuts and did not think that you were
talking about "speed nuts", but then you said 10-32. I do not think there is
such a thing, "speed nuts" are super course thread, for sheet metal grade
screws.

Anyways, where my old age came in, was forgetting about McMaste Carr, my
trusty hardware supplier. Their web address is: .
What I have is G style, McMaster's P/N 90542A343. Look it up in their
catalog and let me know if that is what you are looking for. If you want
more than a few nuts and do not like shipping charges, I will be going to
McMaster within a month and I can pick up those nuts for you and mail them.
Regards

Miroslav Pokorni

----- Original Message -----
From: <donlcramer@...>
To: <hp_agilent_equipment@...>
Sent: Tuesday, September 23, 2003 10:43 PM
Subject: [hp_agilent_equipment] Equipment rack rail C-clip nuts


Thought I'd ask the group:

I'm looking for a source for the C-clip "speed nuts" used in Agilent/HP
equipment rack rails, such as in the N4043A ( nee 1181B ) cart. The part
is an
Agilent PN 0590-0804 "NUT-SHMET 10-32-THD .5-WD STL" and is a "support
part for
which Agilent does not own the design specifications" (which I read as
available off-the-shelf someplace).

Agilent wants 3.38 each (!) for them, and I suspect you guys who work with
rack mount equipment know an online hardware store off the top of your
head
where one can buy a bag of them for something less.

Thanks in advance,

Don Cramer
Beaverton, OR
[email protected]
 

In a message dated 9/24/03 9:10:44 AM Pacific Daylight Time, dmac1054@... writes:
Might try http://www.tinnerman.com/
Doug


Thank you, Doug.? I will!

Regards,

Don

1 - 5 of 5