Re: Agilent 54622D with broken digital inputs - Fixable?
At the risk of taking things further OT, the Nobel Prize just reminded me of a hilarious skit on Saturday Night Live years ago.? Desmond Tutu, portrayed by Eddie Murphy, was on a talk show with Doug
By
Jim Ford
·
#143249
·
|
Re: Agilent 54622D with broken digital inputs - Fixable?
I heard a similar story, but IIRC, it was Niels Bohr who dissolved his Nobel medal.? I'm not familiar with de Hevesy.? ? ? ? Jim? ?Sent from my T-Mobile 4G LTE Device
By
Jim Ford
·
#143248
·
|
Re: HP 8757C SWP DAC Fail
Hi Guido, I'll do the checks you recommend. Thanks you very much. Maurizio
By
maurit
·
#143247
·
|
Hp 8720ES firmware.
I am working on a Hp 8720ES tha does not startup fully so it could be the firmware that is corrupt. It is the newer Board. I do not see any Eprom with labels on. Does anyone have Firmware and maybe
By
Peter Hansen
·
#143246
·
|
Re: 5350B 10 MHz REF to high in amplitude
Thank you
By
DW
·
#143245
·
|
Re: 5350B 10 MHz REF to high in amplitude
Hi, I have a 5350B and 5351B and both have around +15dBm (1.26Vrms/3.56Vpp). If necessary, I simply use an external attenuator. Yves De : [email protected]
By
Yves Tardif
·
#143244
·
|
Re: 5328A counter
I want to thank everyone for the suggestions.? Based on them I conducted a thorough search of all the pcbs.? I was not only able to determine why the device would not power up (ask me no questions
By
Joe White
·
#143243
·
|
5350B 10 MHz REF to high in amplitude
I used a power meter to measure the 10 MHz REF output of the 5350B frequency counter and found the level is around +15dBm which is to high, is there a way I can turn the level down?
By
DW
·
#143242
·
|
HP/Symmetricom 58531A GPS Timing Receiver Analysis & Control software
Somewhat off-topic but I thought I would throw it out there. I have been looking around for a copy of Hewlett Packard (Later Symmetricom) 58531A GPS Timing Receiver Analysis & Control software for the
By
Greg Muir
·
#143241
·
|
Re: Agilent 54622D with broken digital inputs - Fixable?
Having made about 200 gallons at my first job, I can say it is pretty impressive stuff. It took about 1:3 mixture of nitric and hydrochloric acids, and as I recall a dash of sulfuric. I think the
By
Chuck Harris
·
#143240
·
|
Re: HP 8757C SWP DAC Fail
Hi Maurizio, The result is voltage setpoint from the 12bit DA converter on A4 board. I assume you should test this board, and measure the sweep at this bit setpoint. I have read the section 8 SWEEP
By
Guido de Vries
·
#143239
·
|
Re: Agilent 54622D with broken digital inputs - Fixable?
My vote for best aqua regia story is how de Hevesy hid two Nobel medals from the Nazis by dissolving them (the medals, not the Nazis) in aqua regia. After the war, the gold was recovered and the
By
Tom Lee
·
#143238
·
|
Re: Agilent 54622D with broken digital inputs - Fixable?
Aqua Regia, Latin for Royal Water, is a mixture of hydrochloric and nitric acids. ISTR that neither acid by itself works very well on precious metals like silver and gold.? Something about nitric
By
Jim Ford
·
#143237
·
|
Re: HP 140 Series Fan Noise
Thanks, Chuck.? ?Really interesting about oilite and bronze and such.? Stuff one wouldn't normally think about.? ? ? ? JimSent from my T-Mobile 4G LTE Device
By
Jim Ford
·
#143236
·
|
Re: 8510C performance verification program?
I've found the files at groups.io, so the remaining question is only, "Is the version A.05.01 for sale by Keysight only?"
By
John Griessen
·
#143235
·
|
8510C performance verification program?
I just received a paper manual for the 8510C system and on site service referring to version A.03.01 of the 8510C performance verification program.Keysight.com says, "The latest revision is A.05.01. "
By
John Griessen
·
#143234
·
|
Re: Anyone with a 3586B A80 board?
I have a spare A80 board 03586-66580 but I'm in the Netherlands. Shipping costs are +- USD 22 to the US. Board is free, it is from a unit I scrapped. Rene
By
Rene@...
·
#143233
·
|
10390A System Performance Analysis Software for 1650B logic analyzer
Hi all, I'm looking for a copy of the 10390A System Performance Analysis (SPA) Software for the 1650B logic analyzer, and it has so far eluded me, can anyone here help out? EBay has yielded plenty of
By
Richard Halkyard
·
#143232
·
|
Re: HP 140 Series Fan Noise
As a last ditch effort, sure, it might help. But an ordinary oil film won't allow wear until the oil disappears. Typically, an oilite bearing will have a piece of oil soaked felt touching the bearing
By
Chuck Harris
·
#143231
·
|
Re: HP 140 Series Fan Noise
I would look for a label, or perhaps a bit of steel, that is interacting with the magnetic barrel that is pressed inside of the fan's hub. Non ball bearings can't make noises like that. What I think
By
Chuck Harris
·
#143230
·
|