¿ªÔÆÌåÓý

Date
Re: Looking for Agilent PNA old FW repo?
There may have been "snapshots" taken at several times. Be sure to check any snapshots covering the time when you think the SW was listed. Also, if it was on HP FTP site you might look to see if
By Bruce · #129437 ·
Re: Looking for Agilent PNA old FW repo?
The wayback machine saved the page (same one I linked), but the actual firmware files are not saved on the wayback machine from what I can tell.
By Kevin A. · #129436 ·
Re: HP 5342A Microwave Counter and 5344A Source Synchronizer for sale
The HP 5344A has been sold. Thanks for looking.
By gk5220@... · #129435 ·
Re: Hp 8590a eeprom problem.
I understand, but I'm looking to buy a replacement , the part numbers in the manual are NMOS 65536, also manufacturer 1818-3499, and manufacture code 28480.
By Richard Cook <richardcook331@...> · #129434 ·
Re: Suffering from RIFA anxiety!
I reached out to Schaffner directly and they said the following: Our capacitor ratings X1, X2, Y1 or Y2, depending on the filter, and should fail open. We use ceramic and Metalized Polypropylene Film
By Matt Huszagh · #129433 ·
Re: Hp 8590a eeprom problem.
Those are part numbers and date codes. The numbers ave nothing to do with the programming. Cheers! Bruce Quoting Richard Cook <richardcook331@...>:
By Bruce · #129432 ·
Re: Hp 8590a eeprom problem.
Yes I cleaned the contact points with alcohol and q tip, for the female receptacle part I used a acid brush and alcohol. Well guess what, it worked good, put the cover back on and my friendly fail
By Richard Cook <richardcook331@...> · #129431 ·
Re: 8341B vs 8673B
Matt - AFIK, the source modules are not connected to the 8430 in the same way they are connected to the 8350 (and also, I believe to the 8673). I'm just starting to play with the source modules (HP
By Bruce · #129430 ·
Re: 8341B vs 8673B
Quoting Matt Huszagh <huszaghmatt@...>:
By Bruce · #129429 ·
Re: 8341B vs 8673B
Matt - Sure - I just never thought about it that way - I was thinking that the 8340 would be where the configuration was done. No problem Cheers! Bruce Quoting Matt Huszagh <huszaghmatt@...>:
By Bruce · #129428 ·
Re: 8341B vs 8673B
Matt Huszagh <huszaghmatt@...> writes: I should clarify this statement as it's somewhat poorly phrased. The 8510C doesn't apply frequency offsets or multiply your RF source signal. It simply
By Matt Huszagh · #129427 ·
Re: 8341B vs 8673B
"Bruce" <bruce@...> writes: I believe it's under System -> More -> EDIT MULT. SRC. Take a look at Controlling Multiple Sources in the 8510C operating manual. Forward a few pages there's a
By Matt Huszagh · #129426 ·
Re: Suffering from RIFA anxiety!
Yes, the RIFA caps in question are Y and X caps. You are not supposed to replace them with some random cap!
By Wilko Bulte · #129425 ·
Re: 8341B vs 8673B
Quoting Matt Huszagh <huszaghmatt@...>: Something I've missed also. Where in the menus do you find the appropriate settings ?? This would be convenient when using the mm source modules. Cheers!
By Bruce · #129424 ·
Re: 8341B vs 8673B
"gianni chiodo" <chiodo.gianni@...> writes: That's a cool capability I wasn't aware of. Thanks for pointing that out Gianni. It would be nice if the 8510 could control a switch driver
By Matt Huszagh · #129423 ·
unscribe
By gianni chiodo <chiodo.gianni@...> · #129422 ·
Re: 8341B vs 8673B
You set the 8340B with x4 multiplier and the multiplier out using an attenuator goes to the 8517 . Using the 8340B multiplier feature the 8510 ask for let me say sweep from 26 to 52 GHz and the 8340
By chiodo.gianni@... · #129421 ·
Re: Looking for Agilent PNA old FW repo?
Try the wayback machine Cheers! Bruce Quoting "Kevin A. via groups.io" <kevin424@...>:
By Bruce · #129420 ·
Re: PNA (E835XA) Hard drive issue
Hi Julien, Would you be able to share an image of the 266MHz drive with windows 2000 if possible? I am trying to resuscitate an unbootable 266 MHz unit which I know has an OS problem. Thank you, Kevin
By Kevin A. · #129419 ·
Re: Hp 8590a spectrum analyzer
Looks very good . Ing. Patricio A. Greco Taller Aeron¨¢utico de Reparaci¨®n 1B-349 Organizaci¨®n de Mantenimiento Aeron¨¢utico de la Defensa OMAD-001 Laboratorio de Calibraci¨®n ISO 17025 AREA: RF/MW
By Patricio A. Greco · #129417 ·