¿ªÔÆÌåÓý

Date
Re: HP Z3804A
Well, Dave sadly I have not used mine either in a long time. I have a full lab loaded with HP and other gear just sitting there since I retired. At 77, I would like to find someone who would come here
By Mike Feher · #129328 ·
Re: Hp 8590a spectrum analyzer
Here is my new cal data after cleaning the boards contacts. Looks almost perfect to me.
By Richard Cook <richardcook331@...> · #129327 ·
Re: 3458A Schaffner Mains Filter
Hi Matt, have a look at the link for what is inside. The potting compound takes a bit of work to get out.Whether it is worth the effort depends on the availability of a replacement.When my first
By dbztuzujdhgtrjzthxh · #129326 ·
Re: OT WTK -Wanted to Know: Reliable sellers, and on-line lists.
Bonjour Such old equipment is expensive to ship and easily damaged Try local Craigslist, or Ham radio flea market ( listed on ARRL website) A much better modern alternative is A USB VNA, most are
By Froggie the Gremlin · #129325 ·
Re: Agilent E8357A phase lock problems
I've seen phase lock errors when the receiver access loops were damaged or missing. Are all of the access loops in the front in good condition? Another place I can think of would be the internal
By Kevin A. · #129324 ·
WTB: Agilent DSO 80000 display card - part no: 0960-2530 - used in many Agilent DSO scopes
Hi all, Working on a few pieces of Agilent gear. One is a DSO81304B scope that I took a gamble on. Fortunately, it was not obliterated in overseas shipping and it seems to be almost fully functional.
By Kevin A. · #129323 ·
Re: HP Z3804A
Ditto; I thought it sounded familiar, but a quick search proved me wrong.?? My Z3801 was the most expensive piece of T&M gear I ever bought, and it's still running too, but it only gets used
By Dave Seiter · #129322 ·
Re: HP Z3804A
Hi EEVblog mention it https://www.eevblog.com/forum/testgear/prototype-hpagilent-gps-based-refererence-clocks-generator/msg905667/#msg905667 Hardy Fra: [email protected]
By hardyhansendk · #129321 ·
Re: 3458A Schaffner Mains Filter
Usually, they come apart by drilling a rivet, and melting the tar... Some are soldered together. Tar = Messy job. -Chuck Harris <huszaghmatt@...> wrote:
By Chuck Harris · #129320 ·
Re: HP Z3804A
Never seen one before. Time nuts Time-Nuts -- Precise Time and Frequency for Amateurs (leapsecond.com) <http://www.leapsecond.com/time-nuts.htm> is still your best bet. TVB (Tom Van Baak) should know.
By Mike Feher · #129319 ·
16702b scsi id problem
I just bought another Agilent 16702b. The original SCSI drive has failed.? It was an IBM DPSS-309170 which is a 9GB Ultra160 68pin.?? ? There was an Agilent 16702-xxx part# sticker on the drive so
By Tony Jones · #129318 ·
Re: HP Z3804A
I attached a picture of the front and inside. Does it look similar to Z3801 or Z3805? Ozan
By Ozan · #129317 ·
Re: HP Z3804A
I¡¯ve never heard of one either. I have several Z3801s and I think a Z3805. One of my 3801s has been running for about 20 years now continuously. 73 ¨C Mike Mike B. Feher, N4FS 89 Arnold Blvd.
By Mike Feher · #129316 ·
Re: HP Z3804A
It¡¯s the only one I know of. Tom, N8ZM Sent: Friday, September 09, 2022 10:29 PM To: [email protected] Subject: Re: [HP-Agilent-Keysight-equipment] HP Z3804A
By Tom via Metronet · #129315 ·
Re: HP Z3804A
Hi Tom, I searched the time-nuts list but only message I found was someone asking about Z3804 back in 2009 and there was no reply. I may join the list to ask. Is febo hosted one the most active? Ozan
By Ozan · #129314 ·
Re: HP Z3804A
Ozan¡­ Have you searched on the time-nuts list? Those folks will likely know what is available. Tom, N8ZM Sent: Friday, September 09, 2022 4:57 PM To: [email protected] Subject:
By Tom via Metronet · #129313 ·
Re: HP 3580A Spectrum Analyzer - broken frequency display
Hi Marco, That's good you've removed the bezel without damage. Yes, the display part number is KCSC02-105, I can send you a PDF of the schematic and PCB, this also lists the display part number. If
By Peter ONeill · #129312 ·
Re: HP Z3804A
Sorry, I don¡¯t know the answer. Ross Sent: Friday, September 09, 2022 3:36 PM To: [email protected] Subject: Re: [HP-Agilent-Keysight-equipment] HP Z3804A And looks like
By si_emi_01 · #129311 ·
Re: HP Z3804A
And looks like Symmetricom was bought by Microsemi. Is there a Symmetricom product number that is equivalent to HP Z3804A? Or any product that is close to HP Z3804A? Ozan
By Ozan · #129310 ·
Re: HP Z3804A
Yup, Symmetricom. Ross Sent: Friday, September 09, 2022 2:57 PM To: [email protected] Subject: [HP-Agilent-Keysight-equipment] HP Z3804A Does anyone have information about HP
By si_emi_01 · #129309 ·