开云体育

Now I am wide awake. Please check if all the LEDs on the CPU assembly (below the Boeschert cartridge) are lit steady! --- With best regards Tam HANNA (emailing on a BlackBerry PRIV) Enjoy electronics?

Tam We might have chance to find out what causes the problem because the same issue came back again after working perfectly for two days. Jack

You'd know that a pulse happened, but you'd be limited in time resolution to the sampli

Steve, Thanks for the comments. This background definitely helps me, at least. It does occur to me that where the wave shape is often important is when viewing analog waveforms, it's less important

Walter, I have a junker unit next to my desk I use for parts. I think all the knobs are still there. On the road though and won’t be back till Monday Regards, Stephen Hanselman Datagate Systems, LLC

Another data point recommendation from the manufacturer, in their "Evaluating Logic Analyzers Objectively" document: "Timing mode – Select a timing analyzer with a sampling rate of 4 to 10 times

At 2019-04-18 03:04 PM, Keith Monahan via Groups.Io wrote: Nyquist says 2x the signal frequency absolute minimum. Pardon me if I'm out of place, but I'll chime in here about the "Nyquist frequency

That's great then. I've got about a 1.2Ghz digital signal I need to analyze and can clock it down for state analysis. Just wanted to make sure I wasn't looking at a max of 500-600MHz even in timing

Hi Emst Yes I have a spare removable fuse carrier and am in the UK. ?I also have a 437B and have checked that the 432A fuse does fit it. Please send me your address to G6HIG at Yahoo dot com. 73

Ernst, If you will send me your address I’ll send you a fuse cap. Are you good in qrz.com? 73, Dave W6TE Sent: Thursday, April 18, 2019 9:29 AM To: [email protected] Subject:

As far as I know, the card does digital. Glitch catching may be at a lower frequency because of the need for additional clocks and data patterns. The data goes into a comparator, and is then stored.

Including aliasing effects? Peter

Does anyone have the? two disk configuration files for HP E2433-60010 Training Kit for HP Logic Analyzers, preferably for the 16500.

Assuming "perfect" probing? I'm trying to be clear on the capabilities of the card as a starting point. Sent from my Samsung Galaxy smartphone.

How the instrument is set up is important. A surprising number of engineers I’ve run into in companies don’t understand how to set up a logic analyzer. Peter

That's what I'm trying to determine, if the 1-4Ghz is talking analog sampling or digital sampling. What is the maximum digital signal speed (i.e. 1's and 0's) I can expect the card to be able to

Yeah, if someone wanted to sample in timing mode a signal that was switching at a 4GHz rate that wouldn't work, if that was what the original question was. It wasn't clear what the digital vs. analog

Yes exactly. Peter

That's the difference between timing and state analysis on this card. Timing is internal asynchronous clock and state is external synchronous clock. Sent from my Samsung Galaxy smartphone.

Ernst, Send me your address and I’ll send you one. Dave