开云体育

I have an excellent 1727A for sale.? This is an older analog storage oscilloscope, bandwidth 275 MHz. I don't know what it's worth, so am entertaining offers. It's in Los Angeles. Thanks for reading,

There I have it for replaying while on holiday, just reading on my phone and don't checking properly ? So if you have another spectrum analyzed, I would check the output of the first mixer, then

I don't need the HP 117A VLF Comparator, only the loop. -- --- Whitham D. Reeve Anchorage, Alaska USA ---

Hello, did you also have the issue that the machine originally didnt start? Tam --- With best regards Tam HANNA (emailing on a BlackBerry PRIV) Enjoy electronics? Join 14k other followers by visiting

Could please someone confirm/deny whether HP-HIL keyboards from HP 9000 series workstations work with 70000 series? [Y/N] http://www.hpmuseum.net/display_item.php?hw=575 I have a few HP9000

My HP 53310A resumed normal by itself when measuring a modulated signal yesterday. it detected the extended memory and passed POST. hope same issue won't come back again!

Sorry guys! The 70820A is a 40GHz MTA (oscilloscope). To do the front panel calibration. You will need 2 ea. phase matched short length 2.4mm cables, the 11667C splitter and 2 ea. 3.5mm-f to 2.4mm-m

You bet. The new group is now live, [email protected] Bob

Thanks Bob, I did not know they are now charging. Thanks for transferring the files. Dave VE7HR

I thought I had done that some time ago, but it appears I did not. However, transfer of groups from yahoo to groups.io, which was free in the past, now requires a $110 fee (you must upgrade to premium

Someone should migrate to to groups.io Dave VE7HR

Hi all the HP70000 users are also on this group but when things get specific the HP70000 users group is used _____ From: [email protected]

They haven't moved to groups.io?

and last activity on the HP70000 users group is December 2015 ;-( Thanks for the link I have subscribed Dave [email protected]> wrote:

Paul wrote: " Hi Ed? are you saying the 70820 will work at? 50 Ghz ?" No, I couldn't remember what the official spec was, but it was somewhere up there. The point was that you need the higher grade

Hi Dave All OK with Me for you to point out any mistakes just a typo but glad you corrected it for me Hence me stating the difference between a keypad and a key board I don not want another range war

Not trying to nitpick, I just didn't want someone to start searching for the wrong thing. -Dave

Hi Dan: The antenna is not tuned and I expect would work over a wide band. PS there are two versions of the antenna, one uses a couple of 13CW4 Nuvistors and the other uses FETs.

Hi all Dave is correct a typo by me should be HP HIL

Hi Dave the other group is hp_70000@... _____ From: [email protected] [mailto:[email protected]] On Behalf Of Dave Miller Sent: 16 April 2019