开云体育

No You cannot have a 50 Ohm Thermocouple, a Thermocouple is effectively zero Ohms. 73 George G6HIG?

http://www.hpl.hp.com/hpjournal/pdfs/IssuePDFs/1975-10.pdf has info and diagram of sensor internals.

Greetings. For those who use the HP E4406A VSA, I wrote a python script that concatenates several 10MHz spans to make a wider spectrum plot. The tool uses TCP/IP to commuicate with the E4406A, so no

Correct, SSM is just an alternate display for the analyzer, intended to passively record and replay trace data based on the current control settings. Dick's program is an alternative way to access

Is there any other company on the planet who produces 50 OHM thermocouples? It seems odd that such a thing is unobtainable.

Hi Staffan The physical layer for IEE-488 itself is essentially unchanged from the original.? 488.2 deals more with the messaging protocol. This is where all the "universal" commands originated (all

Hello, Many thanks. Notice that I replied to your direct mail. I don't think the problem lies in the 436, but rather in how the USB dongle 82357 performs communication. Don't know if the GPIB

Hi Saffan, I sent you in PM some military manual for 436A. Go from page 3-18 onward, there is about HPIB communication. Milan

wrote: I had a bad diode in the log amp in IF section of my HP 8566B that manifested in a similar manner. See < /g/HP-Agilent-Keysight-equipment/message/73067> for the thread. I have

I had something very similar on my 8568B. It turned out that one of the coax connectors on the A23 assembly was loose. The noise would come and go as I moved the coax cables inside the RF unit. The

Hello, Some more findings... It seems like my Arduino can talk to the instrument after all. Pulling REN low (active) makes it listen to commands sent to its listen address. However, with the REN

While I was working on my power sensor thing, I wanted to check the spectrum of some signal generator by using my 8568B spectrum analyzer. About one year ago, I had the problem that the analyzer had

Graeme, at one time I had one of these attenuators (NOS, if I recall correctly).? It's been years since I've seen it, but it might still be squirreled away somewhere in the shack.? And I don't

...and clearly I should have checked if Dick had replied while I was composing my own reply.? Apologies for the duplication of effort! - Jeff

Please correct me if I'm wrong, but looking at Dick Benson's description of his MATLAB application (as described in the PDF included with his MATLAB files) and comparing his features with those in

Yes, I am aware of John's excellent work and use it often. This offering complements his work. Dick

KE5FX (aka John Miles) has a program to do this (SSM.EXE) as part of his GPIB toolkit http://www.ke5fx.com/gpib/readme.htm and http://www.ke5fx.com/gpib/ssm.htm for details. Dave Sent: 19

Tobias, You will see, not easy task to linearze and to compensate this kind of detector if you need a accuracy. 1. I sugest you to use some of SPDT switches (well matched, small leakage and small

Greetings, ?There appears to be a continuous wave of decommissioned Agilent E4406A "VSA Series Transmitter Tester" boxes hitting eBay.? ?They have a lot of bang-per-buck but have some limitations

Hey Jeff, I didn't see your message, it was not in the other thread! But thanks anyway, I had the same idea as you suggested - I will soon receive some sensors with a blown thermocouple, and there I