开云体育

I found several cross references.聽 I think NTE214 for instance.聽 It's a TO-3 PNP 3 MHz t5A 80V unit and there are many that can probably work in that slot.聽 I may have a few in my junkbox.聽 You

On my 8566B, I found that I have little or no output from the 100Mhz cal signal as well. I haven't lifted the unit out of the rack yet, but to be clear, I have a blinking PL1 Unlock, PL2 Unlock and

though some people have found old integration caps most likely you have a leaky FET. They are tough to find but the section in the manual that addresses this problem should help.

Hi Manuel The only x ref I have for a 1853-0063 is a SJ 1528 Regards Paul B _____ From: hp_agilent_equipment@... [mailto:hp_agilent_equipment@...] Sent: 21

Anyone know of a source or cross reference for a 1853-0063 transistor used in the 410C? I鈥檝e already have a query into Walter at Sphere. Thanks in advance, Manuel

Go to yahoo groups. Sign in. Go to "manage my groups" Select this one. click leave group. This should work for all groups you belong to. Harvey

Greetings, I have had the same issue over the years and found that compressed air works great. It has been my experience that blowing the dust and crud off was more effective than trying to vacuum

I know that when installing a dust collection system for a wood shop, if metal ducting is not to be used, it is important that discharge wires be run inside all the ductwork and grounded to the dust

I'm having trouble unsubscribing.聽 Twice I've sent an unsubscribe request in, and twice I've confirmed it, but still getting posts.聽 Any ideas? Bob - AE6RV

Thar does, indeed, look like what we used to use. Thanks. DaveD

Has anyone got an A4 board (DFA) for the Hp3562a? I am looking for a parts machine in the UK too. Thanks Simon

Hi everyone, the last time I asked a question I got some very good advice, so lets see if we have same luck this time. I have the 1740A that I'm trying to restore, its in really good condition

Dave - About a year ago I bought a small vacuum that was specifically intended to clean computers. It will both suck or blow and has lots of attachments. I think it was around $100, but I am no

Hi Bob Well done in getting the olde going. I have just done the same with a 1725a. It was received with no covers bent timebase shafts. Wiring looms cut and no power supply power

I have a 5342A with option 005 which extends operation from 18GHz to 24GHz. It has the original N-type connector though. So I expect there must be other hardware changes, or as Steve K suggests

Thanks Pete, Yes, that will fit the bill� exactly what I抦 looking for! Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 Sent: Saturday, October 21, 2017 12:57 AM To:

The 3M model 497 is an example of the kind of vacuum you want for this work. They can be had used on eBay for < $100. -Pete

In general, it is not a problem. The thing with static electricity and vacuum cleaners is, though. What happens is the dust inevitably has a charge, and when it gets dragged through the hose, it

I looked around for something similar a while back. I was thinking of the vacuums used to clean out toner from printers (we used to have these when I worked for STK Printer Ops). They had small

HELLO to the Group... Recently aquired a slightly damaged 1701 scope. The three knobs on the time base selector were missing, and all three shafts were bent..Through some subtle persuation, and