开云体育

Hi Dave, I have seen this problem before. The problem can generally be solved by cleaning the rotary switch. I use a product called DeoxIT D5 from Caig

I have an HP 6290A 0-40VDC, 3A power supply. For the most part, it seems fully functional. However, something is amiss in the metering circuitry. The front panel meter mainly pins high or low.

<jbarnes@a...> wrote: Hello John, thank you for all the work to scan those papers and put them together! Jorgen dj0ud

Hi group ! For the benefit of those who work on HP equipment I have made available some parts cross-reference lists at: http://home.cogeco.ca/~jbarnes20/hp_ref.htm These list cross hundreds of

Hi... Anyone take you up on this? I'm near Sacramento. Let me know and I can even meet you somewhere. Thanks! Dennis Dave Haupt wrote:

Yep, you read that right, free. Standard OLD 19" rack. OLD rack with amateur upgrades, this OLD rack is one of the husky sort that OLD timers used to build big OLD amplifiers into. Like most OLD

I have an HP141T mainframe with but two of the rear feet. That's disappointing, as I do like to place the unit at my feet, face upward. If anybody has a parts unit (probably the same feet were on

Subject says it all,can anyone help? Thanks,Brian Goldsmith.

That is farther than a YIG should ever drift by itself. I would put a DC current meter in series with the main tuning coil, select a 0 Hz sweep at the zero-frequency spike on the analyzerr (wherever

Hello Group, I have a HP8565A that I resurrected from three bad units some yesrs back and I have noticed an anomaly that I want to pose for the group. I checked the calibration of the unit about a

Neat. I wonder how long this has been up... surprised I haven't seen it yet. http://www.findarticles.com/p/articles/mi_m0HPJ/di -- jm

Hi: I have an HP 5065A on the way and am looking for an original manual. Thanks for any help, Brooke Clarke, N6GCE --

Did You Try Chicago Miniature Lamp Co.? They Should Have An Equivalent. http://www.chml.com Greyhawk USA greyhawk@... The information contained in this message may be privileged and

Did you try Sphere? http://www.sphere.bc.ca/test/index.html

Hi all Repairing a 5245L and need some of the decimal point indicator lamps. I have looked on Ebay and at sphere.bc.ca and found nothing. Does anyone know of a source for these or an equivalent

Hi, I recently acquired a broken HP3312A function generation. The unit has a burned resistor near a power transistor which I believe is a voltage regulator. The unit also has the amplitude vernier

Have you received any replies on this switch? I have quite a few HP units, and components. If I had a bit of info on the switch you need I may be of some help. Do you have a picture, or page from a

Hi, I've just found a pair of dead probe cables (the cables that go from the 01650-61608 probe pod to the grabber) on my analyser. These are listed in my service manual as HP/Agilent part number

Absolutely. I'm very impressed with the startable phase locked oscillators used to vernier against the timebase, even though I don't fully understand how they pulled that off. Thanks so much for

Hi, Scott -- I have a 5370B, but am not sure what differences there were between the -A and -B models. They are really neat pieces of gear. I don't understand why you're able to get an interval