开云体育

Try: eBay Item number: 3829178511 __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail

Hi, Arthur - I forgot to mention that I am a klutz when it comes to mechanical things and I am not very imaginative. This sort of thing may be easy for you, but it presents a challenge to me. I

Use a BNC 'T' as the tap in a 50 ohm transmission line. Use a small cut-off piece of suitably small phosphor-bronze finger stock to take up the slack between the probe barrel & the inner diameter of

I've got an 8405A Vector Voltmeter. The probes have a barrell with a tiny pointy point coming out. The pointy point is about .03 in diameter and the barrell is about .288 diameter. It would be nice

Hi Stefan: The Tek mailing list has had a number of posts on this subject, but I think the big picture is that a patent or copyright gives the holder the right to sue a violator for damages. Damages

Hi all, I have scanned the manual of the HP339A and made a PDF file. I would like to upload it to BAMA if that's ok. The manual is of course copyrighted by HP (1984), but the instrument is

Further to this, I just spent some time comparing a 8566A catalog excerpt (presumably from sometime before 1984, when the 8566B came out) to the specs for the 8566B as of 1996. The RF specs I looked

Hi John: The 8566 is one of the best spectrum analyzers of the old style I've used. For some info about a system I designed and built with an 8566B see:

Hi, Mike -- I only had the chance to spend a few days with the 8566B, but I was definitely impressed. It is about 12 dB 'hotter' at 10 GHz than the Tek 494AP I normally use, and the 1-3-10

Dear John, I was particularly interested in this question since I've been shopping for an HP 8566B for some time now. I came to the conclusion that I simply cannot justify the expense of this fine

Hi guys, I am currently looking for two sets of REAR protective bars (rear feet) for the HP8920B. Please email me off list at radiorick@... Thank you, Rick T

Hi guys, I am currently looking for some HP8569B knobs. I understand the same knob is used on other units too. Frequency Span / Div and Resolution BW knobs Reference Level and Input ATT db knobs

Can anyone describe the exact differences (specs, features) between the 8566A and 8566B analyzers? I'm trying to determine the degree of GPIB software compatibility between the two. I've recently

Hi, Has anyone managed to get the IAL Downloader included in the HP 165x logic analyser inverse-assembler kit to work? I've tried it on three different machines, and IALDOWN keeps dying with an

Hi Tom, Thanks for the suggestions. I'll give them a try, and keep my fingers crossed. Cheers Rob --- "Thomas P. Gootee" <tomg@...> wrote: --------------------------------- Robert, You

Robert, You might want to periodically search what's available at http://www.govliquidation.com . [Oh. It looks like you're in Australia. Maybe you could get someone to pick it up and ship it to

I've been repairing a 400D AC voltmeter that followed me home from a hamfest. I think I have it working, but I have lingering suspicion about the stability of the 4-tube "op-amp". I don't quite have

Hello everyone, About 6 weeks ago I posted an enquiry for an HP5100B synthesiser driver to mate with a 5100 main unit. Unfortunately no-one replied. On reflection, who would want to part with just

In a message dated 7/14/2004 2:10:55 AM Eastern Standard Time, mpokorni2000@... writes: Before using any Allen wrenches, inspect tip of the wrench. Sometimes, those tips get distorted and worn

Mike, since you would most probably need new screws afterwards anyway, here is something that worked for me several times. Just glue your Allen wrench into the screw with superglue