开云体育

Hi, Jeremy. Let me take a look around the labs here at Raytheon. Might be an E5052A or two that I could fire up. Give me a couple hours. Jim Ford Laguna Hills, California, USA

My HP 8660B/86602B (owned since 1995 - I've owned it longer than it's initial life in industry, I believe) failed to produce a stable output signal when powered up a few days ago (it has worked

I wonder if anyone here has experience or access to an Agilent E5052A signal source analyser? Mine is about 20 years old and is recently showing signs of unreliability. The main symptom is an

I use a Boonton 76-3A precision decade capacitor for my calibration checks. I originally picked it up for calibration of an old Boonton 72BD meter (0.001 to 2000 pF capacitance range) but it now also

If you need accurate measurements, I do have an Andeen-Hagerling 2500E which can measure C @1kHz to better than 5ppm and 8 digits resolution even at 10pF. I rarely get it calibrated but its still the

I have a 8593A with a display problem. There is a spare offered, HP 2090-0514 "for 859x E" question here: is this full compatible and useful in my 8593A? thank you

Jinxie, That keyword text is obviously what I wrote to you at some point.? Anyone with an 8753/8752/871x/8720/8719/8722/8702 can write to me (with the s/n) and get the keywords they need to enable

Fail code 0000 0000 0101 1110

Hi Jinxie, Thank you very much for replying. I am currently in the process of attempting the upgrades: I did receive some feedback on the subject - I just need to ensure that I take the time to

A General Radio 1422D dual range variable would meet the specification. Needs the calbration chart though. The earlier 722D would be OK if calibrated and used at same temperature. Not many units neet

Hello Group,I un-soldered the EEPROM from my HP8753C and went in and modified the necessary bits and I was able to enable options, 002, 006, and 010. I soldered in a IC socket and copied the original

Here’s the deal: HP (and later Agilent) locked these options behind firmware codes tied to the instrument’s serial number. Back in the day, you’d buy the upgrade, call up HP with your serial,

Jinxie, do you happen have keyword for unlocking HP 8753E? Bill? W7AAZ

Is this what you need? Model Number: HP 8753C Serial Number: 3317UO1709 To add : 002, Harmonic Analysis 010, Time Domain Analysis (Std on 8702D), enter the keyword: 3 H T 6 U K Z Z Y 2 M M Note:

Hi. Glad to join this group. I have a HP54502A in fairly good condition I want to fix for my workbench. It fails on A/D test (pass D/A and rest) on CHANNEL 2 only. I have no schematics, just the SM,

Good day all, I hope this message finds you well. Apologies if this is not the correct method of sharing. This topic must have been discussed multiple times as well. If possible, I would like to ask

Yep, I'm in Japan, so shipping is a consideration.. I don't have access to any standards here, besides what might pop up on Yahoo Auctions or the like.

Yes, besides the variable 722D, there are fixed caps also. Those can weigh just 8 oz and 4 inches long so more shippable to Nippon.

Yes GR used polystyrene for cap standards. Can you borrow some GR gear to use as a reference to put a good value number on some stable caps to use in your lab? If not I have an extra GR 722D that

Capacitance standards from General Radio are readily available at places like eBay. Barry - N4BUQ