开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. HP-Agilent-Keysight-Equipment
  2. Messages
Expanded Topics Messages
Date
Re: Fake fire New

 

This is not the time to have this type of discussion. Many of us either visited, worked there, and for my part at least, have gotten to know many people in Santa Rosa. Most are retired now and I think we should all be praying

they are all well. Regards Bill Lauchlan



From: hp_agilent_equipment@... [mailto:hp_agilent_equipment@...]
Sent: Saturday, October 14, 2017 10:14 PM
To: hp_agilent_equipment@...
Subject: Re: [hp_agilent_equipment] Re: Fake fire New





Fake News is fiction, a lie, propaganda. What is being described sounds more
like incompetence. But of course there are a zillion "channels" now and many
fewer paying subscribers, so what do you expect in terms of quality? How many
subscriptions do you pay for? Fewer and fewer people pay for their news sources
these days so quality will inevitably suffer.

On 10/14/2017 8:29 PM, 'Michael A. Terrell' mike.terrell@...
[hp_agilent_equipment] wrote:

It's not like it was, 50 years ago when it would have taken 20 minutes (at
most) to find out who the company is. Now a few seconds with a search engine
would have told them who Keysight is. The difference between losing two
portables and a couple vehicles vs losing the entire corporation is a huge
error that a real journalist wouldn't have made.

-----Original Message-----
From: "Dan Nelson blaze_1024@... [hp_agilent_equipment]"
<hp_agilent_equipment@...>
Sent: Oct 14, 2017 6:46 PM
To: "hp_agilent_equipment@..." <hp_agilent_equipment@...>
Subject: [hp_agilent_equipment] Re: Fake fire New

Whats with the "Fake News" rhetoric. Using the term "Fake News" infers
purposeful deception which I highly doubt is the case. Reporters are humans
and they do make mistakes. Also, not everyone is an electronics nerd
interested in $100,000 pieces of test gear so It's not surprising that a
normal person wouldn't know who Keysight is. How many electronics geeks know
who Beneteau is ? and yet they are worlds most highly regarded builders of
high-performance cruising and racing sailboats. By the way, a quick check if
the USGS shows that there was indeed a small earthquake just outside Sonoma on
the 14th.

Michael A. Terrell





[Non-text portions of this message have been removed]
Re: Fake fire New

 

Fake News is fiction, a lie, propaganda.? What is being described sounds more like incompetence.? But of course there are a zillion "channels" now and many fewer paying subscribers, so what do you expect in terms of quality?? How many subscriptions do you pay for? Fewer and fewer people pay for their news sources these days so quality will inevitably suffer.

On 10/14/2017 8:29 PM, 'Michael A. Terrell' mike.terrell@... [hp_agilent_equipment] wrote:

It's not like it was, 50 years ago when it would have taken 20 minutes (at most) to find out who the company is. Now a few seconds with a search engine would have told them who Keysight is. The difference between losing two portables and a couple vehicles vs losing the entire corporation is a huge error that a real journalist wouldn't have made.

-----Original Message-----
From: "Dan Nelson blaze_1024@... [hp_agilent_equipment]"
<hp_agilent_equipment@...>
Sent: Oct 14, 2017 6:46 PM
To: "hp_agilent_equipment@..." <hp_agilent_equipment@...>
Subject: [hp_agilent_equipment] Re: Fake fire New

?Whats with the "Fake News" rhetoric. Using the term "Fake News" infers
purposeful?deception which I highly doubt is the case. Reporters are humans and they do make mistakes. Also, not everyone?is an electronics nerd interested in $100,000 pieces?of test gear so It's not surprising that a normal person wouldn't know who Keysight is. How many electronics geeks?know who Beneteau is ??and yet they are worlds most highly regarded?builders of high-performance cruising and racing sailboats. By the way, a quick check if the USGS shows that there was indeed a small earthquake just outside Sonoma on the 14th.

Michael A. Terrell
Re: 3585B Spectrum Analyzer

 

If it ran then failed after a little time I would tend to suspect a tantalum capacitor is shorted or shorting.? Keep that in mind when troubleshooting.? The guide might get you to the proper area then look carefully for burned caps or other components before digging in super deeply.

Peter

On 10/14/2017 3:40 PM, ve3poa@... [hp_agilent_equipment] wrote:

I was fortunate enough to receive the 3585b SA recently. When I first picked it up it powered up fine and display appeared to be normal.? Getting it home and after setting it up, it again worked fine. I ran some tests and looked at signals on the screen and was happy with what I was seeing.

However powering it up a couple of days later, there is no display other than a dot in the centre that flashes. While booting up, 1st heard is one beep followed shortly by 2 and then a long pause before several beeps are heard, about? 28.? They start off quickly and then slow down near the end.

I've re-seated some boards and several connections with no change in results.

Any help in pointing me in next steps would be most appreciated.

thanks, Peter
ve3poa
Re: RF Voltmeter?

 

I sent him a message right after his email arrived and I haven't heard from him, either.

-----Original Message-----
From: "'John Snyder' Kochcal@... [hp_agilent_equipment]" <hp_agilent_equipment@...>
Sent: Oct 14, 2017 7:24 PM
To: hp_agilent_equipment@...
Subject: RE: [hp_agilent_equipment] Re: RF Voltmeter?

Sorry to reply to group but direct email does not seem to get to you

I would be interested in the probe

Can you try sending me a direct email kochcal at earthlink dot net



thanks

John



_____

From: hp_agilent_equipment@...
[mailto:hp_agilent_equipment@...]
Sent: Saturday, October 14, 2017 8:16 AM
To: hp_agilent_equipment@...
Subject: [hp_agilent_equipment] Re: RF Voltmeter?








All,



I have a probe for the Boonton 91 just about free for the asking. It is a
model 91-3C (electrical condition unknown - if you know how to test, tell me
and I'll do it) with no screw-on tips and with a section of the cable taped
for a few inches; it was probably attacked by a rogue soldering iron back in
the day. It might fit in a padded envelope or it might have to go small
flat-rate. Let me know if you're interested.



geo








Michael A. Terrell
Re: Fake fire New

 

It's not like it was, 50 years ago when it would have taken 20 minutes (at most) to find out who the company is. Now a few seconds with a search engine would have told them who Keysight is. The difference between losing two portables and a couple vehicles vs losing the entire corporation is a huge error that a real journalist wouldn't have made.

-----Original Message-----
From: "Dan Nelson blaze_1024@... [hp_agilent_equipment]" <hp_agilent_equipment@...>
Sent: Oct 14, 2017 6:46 PM
To: "hp_agilent_equipment@..." <hp_agilent_equipment@...>
Subject: [hp_agilent_equipment] Re: Fake fire New

?Whats with the "Fake News" rhetoric. Using the term "Fake News" infers purposeful?deception which I highly doubt is the case. Reporters are humans and they do make mistakes. Also, not everyone?is an electronics nerd interested in $100,000 pieces?of test gear so It's not surprising that a normal person wouldn't know who Keysight is. How many electronics geeks?know who Beneteau is ??and yet they are worlds most highly regarded?builders of high-performance cruising and racing sailboats. By the way, a quick check if the USGS shows that there was indeed a small earthquake just outside Sonoma on the 14th.? ??

Michael A. Terrell
Re: RF Voltmeter?

 

开云体育

Sorry to reply to group but direct email does not seem to get to you

I would be interested in the probe

Can you try sending me a direct email kochcal at earthlink dot net

?

thanks

John

?

From: hp_agilent_equipment@... [mailto:hp_agilent_equipment@...]
Sent: Saturday, October 14, 2017 8:16 AM
To: hp_agilent_equipment@...
Subject: [hp_agilent_equipment] Re: RF Voltmeter?

?




All,

?

I have a probe for the Boonton 91 just about free for the asking. It is a model 91-3C (electrical condition unknown - if you know how to test, tell me and I'll do it) with no screw-on tips and with a section of the cable taped for a few inches; it was probably attacked by a rogue soldering iron back in the day. It might fit in a padded envelope or it might have to go small flat-rate. Let me know if you're interested.

?

geo
Re: 3585B Spectrum Analyzer

[email protected]
 

Thanks Dennis.? I started the troubleshooting as you suggested but ran out of time tonight.?

I'll be sure to report on what I find, hopefully something simple, but who knows. :)

Peter
Re: Fake fire New

 

?Whats with the "Fake News" rhetoric. Using the term "Fake News" infers purposeful?deception which I highly doubt is the case. Reporters are humans and they do make mistakes. Also, not everyone?is an electronics nerd interested in $100,000 pieces?of test gear so It's not surprising that a normal person wouldn't know who Keysight is. How many electronics geeks?know who Beneteau is ??and yet they are worlds most highly regarded?builders of high-performance cruising and racing sailboats. By the way, a quick check if the USGS shows that there was indeed a small earthquake just outside Sonoma on the 14th.? ??
Re: 3585B Spectrum Analyzer

 

Peter,

The calibration error codes are listed in service manual volume 3, page 11-15. May be ROM Checksum Error but follow recommended procedure in manual for your particular observations.

Dennis



--------------------------------------------

On Sat, 10/14/17, ve3poa@... [hp_agilent_equipment] <hp_agilent_equipment@...> wrote:

Subject: [hp_agilent_equipment] 3585B Spectrum Analyzer
To: hp_agilent_equipment@...
Date: Saturday, October 14, 2017, 3:40 PM






























I was fortunate enough to receive the 3585b SA recently.
When I first picked it up it powered up fine and display
appeared to be normal.? Getting it home and after
setting it up, it again worked fine. I ran some tests and
looked at signals on the screen and was happy with what I
was seeing.

However powering it up a couple of days later, there is no
display other than a dot in the centre that flashes. While
booting up, 1st heard is one beep followed shortly by 2 and
then a long pause before several beeps are heard,
about? 28.? They start off quickly and then slow
down near the end.

I've re-seated some boards and several connections with
no change in results.

Any help in pointing me in next steps would be most
appreciated.

thanks, Peter
ve3poa
3585B Spectrum Analyzer

[email protected]
 

I was fortunate enough to receive the 3585b SA recently. When I first picked it up it powered up fine and display appeared to be normal.? Getting it home and after setting it up, it again worked fine. I ran some tests and looked at signals on the screen and was happy with what I was seeing.

However powering it up a couple of days later, there is no display other than a dot in the centre that flashes. While booting up, 1st heard is one beep followed shortly by 2 and then a long pause before several beeps are heard, about? 28.? They start off quickly and then slow down near the end.

I've re-seated some boards and several connections with no change in results.

Any help in pointing me in next steps would be most appreciated.

thanks, Peter
ve3poa
Re: RF Voltmeter?

 

All,

I have a probe for the Boonton 91 just about free for the asking. It is a model 91-3C (electrical condition unknown - if you know how to test, tell me and I'll do it) with no screw-on tips and with a section of the cable taped for a few inches; it was probably attacked by a rogue soldering iron back in the day. It might fit in a padded envelope or it might have to go small flat-rate. Let me know if you're interested.

geo
Re: help hp5300a / 5303a manual service

[email protected]
 

thank
Roberto
Re: Just purchased HP 3586B--EBAY

 

<html><head><meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<meta name="Generator" content="Microsoft Exchange Server">
<!-- converted from text -->
<style><!-- .EmailQuote { margin-left: 1pt; padding-left: 4pt; border-left: #800000 2px solid; } --></style></head>
<body>
<font size="2"><span style="font-size:10pt;"><div class="PlainText">Hi Lamont<br>
<br>
Error code CE-1 is a failure in the input attenuator on the A2 board.&nbsp; Has the unit been accidentally transmitted to?<br>
<br>
73 George G6HIG<br>
________________________________________<br>
From: hp_agilent_equipment@... <hp_agilent_equipment@...> on behalf of george g_einst@... [hp_agilent_equipment] <hp_agilent_equipment@...><br>
Sent: 13 October 2017 22:25<br>
To: hp_agilent_equipment@...<br>
Subject: Re: [hp_agilent_equipment] Just purchased HP 3586B--EBAY<br>
<br>
Hi Lamont<br>
<br>
According to the HP 3586 user manual the B variant already has a BNC input that is switchable between 50 and 75 Ohms.<br>
<br>
The A and B variants were teleco &quot;specials" the C variant was the general use one, however it is quite possible that your B may not be as the manual and was customised for a specific client.<br>
<br>
A by far larger problem with 3586's is the NiCad ram backup battery which leaks and contaminates/corrodes the PCB edge connector, this must be the first check that you do.<br>
<br>
73 George G6HIG<br>
________________________________________<br>
From: hp_agilent_equipment@... <hp_agilent_equipment@...> on behalf of nojunk@... [hp_agilent_equipment] <hp_agilent_equipment@...><br>
Sent: 13 October 2017 17:14<br>
To: hp_agilent_equipment@...<br>
Subject: [hp_agilent_equipment] Just purchased HP 3586B--EBAY<br>
<br>
I waiting to get it, I 'm pretty excited, but also concerned it will need repair.<br>
In the listing I note is the display has error code of&nbsp; CE-1. The manual says,<br>
"Operator error, Attempt made to Manualy change the FULL SCALE while in Auto Range"<br>
So I hope that is not a real problem.<br>
&nbsp; I will be changing the WECO input connectors to BNC. I note the unit is 75 ohm, I'll be working with<br>
50 ohms.Is it wise to put a 50 ohm to 75 ohm L pad internal when I install the BNC connector?<br>
And then note, "all measurements are MINUS5.72 DB".<br>
&nbsp;What would I add/subtract if I just plugged a 50 source into the 75 ohm input?<br>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Thanks, Lamont<br>
.<br>
<br>
<br>
<br>
<br>
<br>
------------------------------------<br>
<br>
------------------------------------<br>
<br>
<br>
------------------------------------<br>
<br>
Yahoo Groups Links<br>
<br>
<*> To visit your group on the web, go to:<br>
&nbsp;&nbsp;&nbsp; <a href=";data=02%7C01%7Cg_einst%40hotmail.com%7C34fac44ba60a4b4e808808d512895f92%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636435303571457841&amp;sdata=2i0NQDCdEGguGUrsPMKZd31MlO5IYPuogYws9f%2FLpag%3D&amp;reserved=0">;data=02%7C01%7Cg_einst%40hotmail.com%7C34fac44ba60a4b4e808808d512895f92%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636435303571457841&amp;sdata=2i0NQDCdEGguGUrsPMKZd31MlO5IYPuogYws9f%2FLpag%3D&amp;reserved=0</a><br>
<br>
<*> Your email settings:<br>
&nbsp;&nbsp;&nbsp; Individual Email | Traditional<br>
<br>
<*> To change settings online go to:<br>
&nbsp;&nbsp;&nbsp; <a href=";data=02%7C01%7Cg_einst%40hotmail.com%7C34fac44ba60a4b4e808808d512895f92%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636435303571457841&amp;sdata=nAWyEsMIOQ5taQykGA466jIvzvaPOUMzu09vUYwXeXE%3D&amp;reserved=0">;data=02%7C01%7Cg_einst%40hotmail.com%7C34fac44ba60a4b4e808808d512895f92%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636435303571457841&amp;sdata=nAWyEsMIOQ5taQykGA466jIvzvaPOUMzu09vUYwXeXE%3D&amp;reserved=0</a><br>
&nbsp;&nbsp;&nbsp; (Yahoo! ID required)<br>
<br>
<*> To change settings via email:<br>
&nbsp;&nbsp;&nbsp; hp_agilent_equipment-digest@...<br>
&nbsp;&nbsp;&nbsp; hp_agilent_equipment-fullfeatured@...<br>
<br>
<*> To unsubscribe from this group, send an email to:<br>
&nbsp;&nbsp;&nbsp; hp_agilent_equipment-unsubscribe@...<br>
<br>
<*> Your use of Yahoo Groups is subject to:<br>
&nbsp;&nbsp;&nbsp; <a href=";data=02%7C01%7Cg_einst%40hotmail.com%7C34fac44ba60a4b4e808808d512895f92%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636435303571457841&amp;sdata=ZxAVzmDydXr3zzMEza9bViYuhC%2B7fZgZOfJ3YAZFAuo%3D&amp;reserved=0">;data=02%7C01%7Cg_einst%40hotmail.com%7C34fac44ba60a4b4e808808d512895f92%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636435303571457841&amp;sdata=ZxAVzmDydXr3zzMEza9bViYuhC%2B7fZgZOfJ3YAZFAuo%3D&amp;reserved=0</a><br>
<br>
</div></span></font>
</body>
</html>
Re: RF Voltmeter?

 

It's similar to the HP 3400A and the Ballantine 323. The HP 3403C is
a true thermal RMS meter, with 100MHz bandwidth.
And there the Millivac MV828-A which goes to just over 1GHz with 1mV FSD
(-50dBm with the 50 Ohm head)
Chopper amp and very stable...if you see one for sale make sure it comes with
the cable (Mil Spec style plug) and with the plug in 50 Ohm BNC terminator

And reliable..been using mine for over 10 years without a hiccup
And there is an Hp 3400B which doubles the hi end bandwidth over the A model
and has a solid state chopper.
The Ballantine 323A series is more versatile than the Hp 3400 series and has a much
larger scale with better reading accuracy with selectable input isolation
from case , (that the Hp hasn't), and several options, meter damping ranges, battery operation
and with bandwidths usually far in excess of the specs....the earlier ones used a mech
chopper , later ones were solid state, but specs very much the same for both.
Above might help if looking for a unit suitable for your purpose
John Byers
Re: Just purchased HP 3586B--EBAY

 

I suspect that the WECO 372A is made up of two WECO 358A plugs along-side each other ‘cos we always used a pair of WECO 477B sockets for 124 Ohm on the front panel. In fact the ones we used were supplied direct

from Western Electric for contract products ‘cos the genuine article is not available commercially (I think). For Options such as on the 3586B, I believe the connectors used would be “commercial equivalents” of the WECO products. Trompeter and ADC (Minneapolis?) are the two manufacturers which mainly come to mind.



Regards Bill Lauchlan



From: hp_agilent_equipment@... [mailto:hp_agilent_equipment@...]
Sent: Friday, October 13, 2017 11:06 PM
To: hp_agilent_equipment@...
Subject: Re: [hp_agilent_equipment] Re: Just purchased HP 3586B--EBAY





The RCA 50 ohm WECO type connector for broadcast patch panels has a .050" pin diameter. The standard WECO 358A 75 ohm connector has a .090" diameter pin. Both possess a .375" diameter barrel. The mini-WECO (WECO 440) has a totally different barrel diameter (.298"). HP specifies a WECO 372A connector to fit the 124 ohm port.

It is worth checking to see if the 3506B has option 001. If so, HP uses the 358A/75 ohm & 372A/124 ohm connectors. The three units I have here all have option 001. If it is a model with non-optioning (one of the more rare units from what I have found), the 75 ohm input uses the WECO 439/440A (mini-WECO), the 124 ohm input uses the WECO 443A, the 135 ohm input uses the WECO 431A and the 600 ohm input uses the WECO 310 (TRS plug).

And a word of caution on the 310 plug. Although it looks like a standard 1/4" stereo plug, it is not. Dimensions are different and the tip and ring are of a smaller diameter. Pushing a standard stereo plug into the jack on the unit will most likely either distort the jack contacts or damage them requiring replacement of the jack..

Greg
Re: Just purchased HP 3586B--EBAY

 

I saw that 3586 on ebay. the connectors on the back labeled Oven output and external reference need to be connected to each other. There are articles on the internet on how to convert the inputs from 75 ohm impedance to 50 ohm impedance. Check the schematic on the 3586C which has a 50 ohm impedance input.
Paul Koby
KA5OBI ?
Re: Just purchased HP 3586B--EBAY

 

The RCA 50 ohm WECO type connector for broadcast patch panels has a .050" pin diameter.? The standard WECO 358A 75 ohm connector has a .090" diameter pin.? Both possess a .375" diameter barrel.? The mini-WECO (WECO 440) has a totally different barrel diameter (.298").? HP specifies a WECO 372A connector to fit the 124 ohm port.

It is worth checking to see if the 3506B has option 001.? If so, HP uses the 358A/75 ohm & 372A/124 ohm connectors.? The three units I have here all have option 001.? If it is a model with non-optioning (one of the more rare units from what I have found), the 75 ohm input uses the WECO 439/440A (mini-WECO), the 124 ohm input uses the WECO 443A, the 135 ohm input uses the WECO 431A and the 600 ohm input uses the WECO 310 (TRS plug).

And a word of caution on the 310 plug.? Although it looks like a standard 1/4" stereo plug, it is not.? Dimensions are different and the tip and ring are of a smaller diameter.? Pushing a standard stereo plug into the jack on the unit will most likely either distort the jack contacts or damage them requiring replacement of the jack..

Greg
Re: Just purchased HP 3586B--EBAY

 

开云体育

The correct matching parts are a WECO 358A Plug to a WECO 477B Socket. The comment(s) about Trompeter Plugs is absolutely correct. I’m not sure if there is different part which is a direct equivalent for 358A

I have to check adapters called up in HP3586B Manual(s).

?

Bill Lauchlan

?

From: hp_agilent_equipment@... [mailto:hp_agilent_equipment@...]
Sent: Friday, October 13, 2017 10:28 PM
To: hp_agilent_equipment@...
Subject: Re: [hp_agilent_equipment] Re: Just purchased HP 3586B--EBAY

?

?

HP specifically states on their spec sheet for the 3586 that the 75 ohm port mates with the WECO 358A plug.

Greg
Re: Just purchased HP 3586B--EBAY

 

HP specifically states on their spec sheet for the 3586 that the 75 ohm port mates with the WECO 358A plug.

Greg
Re: Some HP 8341A questions

 

In a typical HP YTO loop config, one end of the main coil is connected to -40V, the other is connected to the emitter of the main coil driver. The current through the main coil is controlled by the drive transistor. Look closer to your driver board.?

The main coil has absolutely no chance of surviving a 40V DC. Do you have? schematics of the YTO loop?

Good luck,
Calvin
64641 - 64660 of 150807