I was fortunate enough to receive the 3585b SA recently. When I first picked it up it powered up fine and display appeared to be normal.? Getting it home and after setting it up, it again worked fine. I ran some tests and looked at signals on the screen and was happy with what I was seeing.
However powering it up a couple of days later, there is no display other than a dot in the centre that flashes. While booting up, 1st heard is one beep followed shortly by 2 and then a long pause before several beeps are heard, about? 28.? They start off quickly and then slow down near the end.
I've re-seated some boards and several connections with no change in results.
Any help in pointing me in next steps would be most appreciated.
thanks, Peter
ve3poa
