Dear Colleagues,
I need some help and or tips on how to remove frozen Allen
set-screws like the ones found on equipment knobs.
The typical scenario happens when trying to remove a stubborn
set screw. The Allen wrench "slips" and rounds the insertion pattern
slightly. Has anyone heard of a slightly oversized set of Allen
wrenches (on the order of .001" - .002") or is this the wrong
approach? If they exist, who supplies them?
Any comments and/or suggestions are welcome.
Regards,
Mike DiGirolamo, W4XN
Charlottesville, VA 22901
|
hi all
just got an HP547A current probe off Ebay for troubleshooting purposes;
anyone knows of a downloadable op-manual? thanks Adriano
|
Re: 5245 counter service manual
Greetings from a lurker and test equipment junkie :-)
The USM-207 is not the same as a 5245. I have had both and I expect
the circuitry probably isn't even the same. Although I didn't check
the manuals when I had the equipment.
The -207 I had did come with the 500 MHz converter, and I think there
may have been others available, but I never found out for sure.
Back to lurking.
- Mark
|
Re: 5245 counter service manual
-----------------------------------
Dave,
The only version of the HP 5245L that I've found on the LOGSA site is called the CP-772A/U (and maybe also the CP-772/U), which appears to be an H96-5245L.
On the LOGSA site, they have only the parts-list manual for the unit. There are two other TMs for it that are NOT on line, there. Their TM numbers are listed in the parts-list manual, which is TM 11-6625-1682-24P.
The downloadable parts manual, unlike many of the other LOGSA parts-list manuals, DOES have detailed board/component-layout and exploded view diagrams, with lists of part numbers. But for component values, you either have to decipher them from the part numbers or have a copy of the Federal Logistics (Fedlog) database.
According the the Fedlog database, the 5245M is called the CP-1049P/U. But I couldn't find any manuals for it, on LOGSA, searching titles for CP-1049 and also searching by its NSN/NIIN numbers for the two 5245M versions listed.
Good luck!
Regards,
Tom Gootee
-----------------------------------
Date: Mon, 12 Jul 2004 17:35:27 +1200
From: "Dave Brown" <tractorb@...>
Subject: Re: 5245 counter service manual
Is USM-207 the correct designator?
From a quick comparison there seem to be some quite significant differences
between the 5245L and the USM207-so much so I doubt the USM 207 manual may
be much use for a 5245L.
Dave, ZL3FJ
|
Re: 5245 counter service manual
Hi
I have a copy of the service manual(5245L) plus manual changes until
June 1979.
I can scan the pages or schematics you need.
Regards.
toggle quoted message
Show quoted text
El 12/07/2004, a las 19:06, Elbicon mfg co escribi¨®: Yes this is the one ,
unfortunately logsa only seems to have a partslist manual with
exploded views etc ,? but no schematics !
Thanks anyway,? but to solve my problem i need schematics ...
----- Original Message -----
From: computeruser04
To: hp_agilent_equipment@...
Sent: Monday, July 12, 2004 6:58 PM
Subject: [hp_agilent_equipment] Re: 5245 counter service manual
I think the CP-772A/U might be the one we are looking for
BL
--- In hp_agilent_equipment@..., "ericapple2004"
<elbicon@p...> wrote:
Hello group,
?
Trying to restore a 5245M counter? , is there a downloadable service
manual or schematics somewhere , 5245L would also do the job,
for this one ,? and maybe some info regarding the 5254C plug-in? .
? > Many thanks,
?
Erik Paret
Yahoo! Groups Sponsor
ADVERTISEMENT
<lrec_companion_043004.gif>
<l.gif>
Yahoo! Groups Links
? To visit your group on the web, go to:
?
? To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...
?
? Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
|
Re: 5245 counter service manual
Yes this is the one ,
unfortunately logsa only seems to have a partslist
manual with exploded views etc ,? but no schematics !
Thanks anyway,? but to solve my problem i need
schematics ...
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Monday, July 12, 2004 6:58 PM
Subject: [hp_agilent_equipment] Re: 5245
counter service manual
I think the CP-772A/U might be the one we are looking
for
BL
--- In hp_agilent_equipment@...,
"ericapple2004"
<elbicon@p...>
wrote:
> Hello group,
>?
> Trying to restore a 5245M
counter? , is there a downloadable
service
> manual or
schematics somewhere , 5245L would also do the job,
> for this one
,? and maybe some info regarding the 5254C plug-in? .
>?
> Many thanks,
>?
> Erik Paret
|
Re: 5245 counter service manual
I think the CP-772A/U might be the one we are looking for BL --- In hp_agilent_equipment@..., "ericapple2004" <elbicon@p...> wrote: Hello group,
Trying to restore a 5245M counter , is there a downloadable service manual or schematics somewhere , 5245L would also do the job,
for this one , and maybe some info regarding the 5254C plug-in .
Many thanks,
Erik Paret
|
Re: 5245 counter service manual
Hi Dave and all the List, Is USM-207 the correct designator? I think it is not... When I was trying to repair my 5245M I fount a WEB page with links to the USM-207 manuals and, not, it is not same beast. It could be similar in design but definitely very different externally. Regards, JOSE ---------------------------------------------------------------------- 73 EB5AGV / EC5AAU - JOSE V. GAVILA La Canyada - Valencia (SPAIN) - Loc: IM99SM Vintage Radio: Vintage Test Equipment: European Boatanchors List:
|
Re: 5245 counter service manual
Hi
All,
May be
the USM-207 is similar but it is not the same beast.
?
perhaps someone can shed some light on this
?
73's
Gary VK2KYP
toggle quoted message
Show quoted text
Is
USM-207 the correct designator?
From a quick comparison there seem to be
some quite significant differences
between the 5245L and the USM207-so much
so I doubt the USM 207 manual may
be much use for a 5245L.
Dave,
ZL3FJ
----- Original Message -----
From: "Gary Beech"
To:
Sent: Monday, July 12, 2004
12:39 PM
Subject: RE: [hp_agilent_equipment] 5245 counter service
manual
Hi Brooke,
I have also been looking for HP5245 manual,
thank you for this information.
Is there a list to convert from
civilian numbers eg HP-5245 to the military
number in this case
USM-207
thank you
73 Gary VK2KYP
-----Original
Message-----
From: Brooke Clarke [mailto:brooke@...]
Sent:
Monday, 12 July 2004 12:46
To:
hp_agilent_equipment@...
Subject: Re: [hp_agilent_equipment]
5245 counter service manual
Hi Erik:
Do a title search for
USM-207 here:
You'll
find a number of manuals for the 5245
Have Fun,
Brooke Clarke,
N6GCE
--
Date:
Sun, 11 Jul 2004 09:48:24 -0000
>?? From: "ericapple2004"
>Subject: 5245 counter service
manual
>
>Hello group,
>
>Trying to restore a 5245M
counter? , is there a downloadable service
>manual or schematics
somewhere , 5245L would also do the job,
>for this one ,? and maybe
some info regarding the 5254C plug-in? .
>
>Many
thanks,
>
>Erik Paret
>
Yahoo! Groups
Sponsor
ADVERTISEMENT
<
oups/S=1705083663:HM/EXP=1089643546/A=2128215/R=0/SIG=10se96mf6/*
anion.yahoo.com> click
here
<
:HM/A=2128215/rand=564925595>
?
_____
Yahoo! Groups Links
* To visit your group on the web,
go to:
*
To unsubscribe from this group, send an email
to:
hp_agilent_equipment-unsubscribe@...
>
*
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<>
.
**
The
information contained in this e-mail message and any accompanying files
is
or may be confidential.If you are not the intended recipient, any
use,
dissemination, reliance,forwarding, printing or copying of this e-mail
or
any attached files is unauthorised.This e-mail is subject to copyright.
No
part of it should be reproduced,adapted or communicated without the
written
consent of the copyright owner.If you have received this e-mail in
error,
please advise the sender immediately by return e-mail, or telephone
and
delete all copies.Fairfax does not guarantee the accuracy or
completeness
of any information contained in this e-mail or attached files.
Internet
communications are not secure, therefore Fairfax does not accept
legal
responsibility for the contents of this message or attached
files.
**
|
Re: 5245 counter service manual
Is USM-207 the correct designator?
From a quick comparison there seem to be some quite significant differences
between the 5245L and the USM207-so much so I doubt the USM 207 manual may
be much use for a 5245L.
Dave, ZL3FJ
toggle quoted message
Show quoted text
----- Original Message ----- From: "Gary Beech" <gbeech@...> To: <hp_agilent_equipment@...> Sent: Monday, July 12, 2004 12:39 PM Subject: RE: [hp_agilent_equipment] 5245 counter service manual Hi Brooke, I have also been looking for HP5245 manual, thank you for this information. Is there a list to convert from civilian numbers eg HP-5245 to the military number in this case USM-207 thank you 73 Gary VK2KYP -----Original Message----- From: Brooke Clarke [mailto:brooke@...] Sent: Monday, 12 July 2004 12:46 To: hp_agilent_equipment@... Subject: Re: [hp_agilent_equipment] 5245 counter service manual Hi Erik: Do a title search for USM-207 here: You'll find a number of manuals for the 5245 Have Fun, Brooke Clarke, N6GCE -- Date: Sun, 11 Jul 2004 09:48:24 -0000 From: "ericapple2004" <elbicon@...>
Subject: 5245 counter service manual
Hello group,
Trying to restore a 5245M counter , is there a downloadable service
manual or schematics somewhere , 5245L would also do the job,
for this one , and maybe some info regarding the 5254C plug-in .
Many thanks,
Erik Paret
Yahoo! Groups Sponsor ADVERTISEMENT < oups/S=1705083663:HM/EXP=1089643546/A=2128215/R=0/SIG=10se96mf6/* anion.yahoo.com> click here < :HM/A=2128215/rand=564925595> _____ Yahoo! Groups Links * To visit your group on the web, go to: * To unsubscribe from this group, send an email to: hp_agilent_equipment-unsubscribe@... <mailto:hp_agilent_equipment-unsubscribe@...?subject=Unsubscribe * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <> . ** The information contained in this e-mail message and any accompanying files is or may be confidential.If you are not the intended recipient, any use, dissemination, reliance,forwarding, printing or copying of this e-mail or any attached files is unauthorised.This e-mail is subject to copyright. No part of it should be reproduced,adapted or communicated without the written consent of the copyright owner.If you have received this e-mail in error, please advise the sender immediately by return e-mail, or telephone and delete all copies.Fairfax does not guarantee the accuracy or completeness of any information contained in this e-mail or attached files. Internet communications are not secure, therefore Fairfax does not accept legal responsibility for the contents of this message or attached files. **
|
Re: 5245 counter service manual
Hi
Brooke,
I have
also been looking for HP5245 manual, thank you for this
information.
?
?
Is
there a list to convert from civilian numbers eg HP-5245 to the military number
in this case USM-207
?
thank
you
?
73
Gary VK2KYP
toggle quoted message
Show quoted text
Hi Erik:
Do a title search for USM-207
here:
You'll
find a number of manuals for the 5245
Have Fun,
Brooke Clarke,
N6GCE
--
Date:
Sun, 11 Jul 2004 09:48:24 -0000
>?? From: "ericapple2004"
>Subject: 5245 counter service
manual
>
>Hello group,
>
>Trying to restore a 5245M
counter? , is there a downloadable service
>manual or schematics
somewhere , 5245L would also do the job,
>for this one ,? and maybe
some info regarding the 5254C plug-in? .
>
>Many thanks,
>
>Erik Paret
>
**
The information contained in this e-mail message and any accompanying files
is or may be confidential.If you are not the intended recipient, any use,
dissemination, reliance,forwarding, printing or copying of this e-mail or
any attached files is unauthorised.This e-mail is subject to copyright. No
part of it should be reproduced,adapted or communicated without the written
consent of the copyright owner.If you have received this e-mail in error,
please advise the sender immediately by return e-mail, or telephone and
delete all copies.Fairfax does not guarantee the accuracy or completeness
of any information contained in this e-mail or attached files. Internet
communications are not secure, therefore Fairfax does not accept legal
responsibility for the contents of this message or attached files.
**
|
Re: 5245 counter service manual
Hi Erik:
Do a title search for USM-207 here:
You'll find a number of manuals for the 5245
Have Fun,
Brooke Clarke, N6GCE
--
Date: Sun, 11 Jul 2004 09:48:24 -0000
toggle quoted message
Show quoted text
From: "ericapple2004" <elbicon@...>
Subject: 5245 counter service manual
Hello group, Trying to restore a 5245M counter , is there a downloadable service manual or schematics somewhere , 5245L would also do the job,
for this one , and maybe some info regarding the 5254C plug-in .
Many thanks, Erik Paret
|
I posted an album with photos that I hope will make my question
clear. Please view and help me if you can. Any comments about this
unit and general assistance with HP documentation would be welcome.
I know the data is good in the HP manuals but it's like I have to
learn to read all over again. Maybe I've studied too many Tektronix
manuals.:)
Thanks in advance for any help and comments.
George
Atlanta
|
HP 8557A Spectrum Analyzer
Good morning Group,
I recently purchased a 8557A that looks to be in good condition but
I don't have a display so I haven't been able to check it out.
Neither have I been able to find a service manual but I do have a
manual for the 8558A which at least is similar.
My Question is, there seems to be a missing lead from the
compression fitting labled LO OUT located on the top surface about
in the center of the unit. Can someone help me to determine where
this lead terminates. A photo of the top view of the unit would be
great if you could e-mail a copy to me. Also what is the connector
at the top left rear from the front view. It looks like some sort of
interlock or a contact point from within the cabinet.
I have a HP 180d scope frame on the way. Will the 180d have the
necessary options required for the basic operation of this unit?
Anyone with experience with this unit could be a very big help to me
and I would appreciate it very much
George Headley
Atlanta
|
5245 counter service manual
Hello group,
Trying to restore a 5245M counter , is there a downloadable service
manual or schematics somewhere , 5245L would also do the job,
for this one , and maybe some info regarding the 5254C plug-in .
Many thanks,
Erik Paret
|
Re: HP 8593A Spectrum Analyzer
No problem Clif.
?
Jeff
?
toggle quoted message
Show quoted text
-----Original Message-----
From: Clif [mailto:clif@...]
Sent: Saturday, July 10, 2004
11:09 AM
To:
hp_agilent_equipment@...
Subject: [hp_agilent_equipment]
Re: HP 8593A Spectrum Analyzer
?
Thanks for trying and the link. I now have the manual.
After several
discussions with my web-hosting company it has
been determined that
to have a folder available for uploads requires
some type of
programming I'm not familiar with so I gave up.
Again thanks,
Clif
--- In hp_agilent_equipment@...,
"Jeff Spence"
wrote:
> Clif and all,
>
>?
>
> After several attempts to email (my server
doesn't like that big
file) I
> looked for it on the web and found it at the
following address:
>
>?
>
>
>
>?
>
> It appears that Agilent has many documents of
this type on their
site.? This
> may be a good resource for recently obsolete
equipment.
>
>?
>
> Jeff
>
>?
>
> -----Original Message-----
> From: Clif [mailto:clif@a...]
> Sent: Thursday, July 01, 2004 1:42 PM
> To: hp_agilent_equipment@...
> Subject: [hp_agilent_equipment] HP 8593A
Spectrum Analyzer
>
>?
>
> Does anyone have the procedure for replacing
the battery in this
> piece of equipment??
>
> Clif
>
>
>
>
>
>
> Yahoo! Groups Sponsor
>
>
>
> ADVERTISEMENT
>?
>
<
76/D=gr
>
oups/S=1705083663:HM/EXP=1088797348/A=2128215/R=0/SIG=10se96mf6/*http
:/compa
> nion.yahoo.com> click here
>
>
>?
> <
M=295196.4901138.6071305.3001176/D=groups/S=
> :HM/A=2128215/rand=514379723>
>
>?
>
>?? _____?
>
> Yahoo! Groups Links
>
>
*???????? To visit your group on the
web, go to:
>
>??
>
>
*???????? To unsubscribe from this
group, send an email to:
> hp_agilent_equipment-unsubscribe@...
>
subject=Unsubscribe
> >
>??
>
>
*???????? Your use of Yahoo! Groups is
subject to the Yahoo! Terms
of
> <>?
Service.
|
Re: HP 8593A Spectrum Analyzer
Thanks for trying and the link. I now have the manual. After several discussions with my web-hosting company it has been determined that to have a folder available for uploads requires some type of programming I'm not familiar with so I gave up. Again thanks, Clif --- In hp_agilent_equipment@..., "Jeff Spence" <jspence@p...> wrote: Clif and all,
After several attempts to email (my server doesn't like that big file) I looked for it on the web and found it at the following address:
It appears that Agilent has many documents of this type on their site. This may be a good resource for recently obsolete equipment.
Jeff
-----Original Message-----
From: Clif [mailto:clif@a...]
Sent: Thursday, July 01, 2004 1:42 PM
To: hp_agilent_equipment@...
Subject: [hp_agilent_equipment] HP 8593A Spectrum Analyzer
Does anyone have the procedure for replacing the battery in this
piece of equipment??
Clif
Yahoo! Groups Sponsor
ADVERTISEMENT
< 76/D=gr oups/S=1705083663:HM/EXP=1088797348/A=2128215/R=0/SIG=10se96mf6/*http :/compa nion.yahoo.com> click here
< M=295196.4901138.6071305.3001176/D=groups/S= :HM/A=2128215/rand=514379723>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
* To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...
<mailto:hp_agilent_equipment-unsubscribe@...? subject=Unsubscribe
* Your use of Yahoo! Groups is subject to the Yahoo! Terms
of <> Service.
|
Looking at datasheets at Pomona & Delta - Thats what they are - Twinaxial. Thanks for the response BL --- In hp_agilent_equipment@..., Brooke Clarke <brooke@p...> wrote: Hi BL:
I don't have experience directly with this connector but there are a couple of shielded connectors that use two contact pins.
One is called Twinax and the other is used on the R-390 tube type
military receiver. The following companies may be of help:
Have Fun,
Brooke Clarke, N6GCE
Date: Thu, 08 Jul 2004 04:32:42 -0000
From: "computeruser04" <computeruser@s...>
Subject: HP 3440A rear connectors
I have just acquired an old HP 3440A nixie tube rack mount DC
voltmeter. Although I have the service manual for the 3440A, the rack mounted version is physically different from the one in the manual
in a few ways. For one - there are no inputs on the front panel, just
on the rear. There are 2 different BNC type jacks that I have never
seen before. The ground is isolated from the chassis so there are
actually 2 internal connectors along with the usual outer ground connector.
Both jacks have these 2 internal contacts but both jacks are
different styles. I've tried to look these up (google images etc)
and have no idea what "type" they are so that I can get some kind of
adaptor to use a BNC terminated probe or even banana terminated
test leads.
Thanks
BL
|
Hi BL:
I don't have experience directly with this connector but there are a couple of shielded connectors that use two contact pins.
One is called Twinax and the other is used on the R-390 tube type military receiver. The following companies may be of help:
Have Fun,
Brooke Clarke, N6GCE
toggle quoted message
Show quoted text
Date: Thu, 08 Jul 2004 04:32:42 -0000
From: "computeruser04" <computeruser@...>
Subject: HP 3440A rear connectors
I have just acquired an old HP 3440A nixie tube rack mount DC voltmeter. Although I have the service manual for the 3440A, the rack mounted version is physically different from the one in the manual in a few ways. For one - there are no inputs on the front panel, just on the rear. There are 2 different BNC type jacks that I have never seen before. The ground is isolated from the chassis so there are actually 2 internal connectors along with the usual outer ground connector. Both jacks have these 2 internal contacts but both jacks are different styles. I've tried to look these up (google images etc) and have no idea what "type" they are so that I can get some kind of adaptor to use a BNC terminated probe or even banana terminated test leads.
Thanks
BL
|
I have just acquired an old HP 3440A nixie tube rack mount DC
voltmeter. Although I have the service manual for the 3440A, the rack
mounted version is physically different from the one in the manual in
a few ways. For one - there are no inputs on the front panel, just on
the rear. There are 2 different BNC type jacks that I have never seen
before. The ground is isolated from the chassis so there are actually
2 internal connectors along with the usual outer ground connector.
Both jacks have these 2 internal contacts but both jacks are
different styles. I've tried to look these up (google images etc) and
have no idea what "type" they are so that I can get some kind of
adaptor to use a BNC terminated probe or even banana terminated test
leads.
Thanks
BL
|
Mike D.