Looking at datasheets at Pomona & Delta - Thats what they are -
Twinaxial. Thanks for the response
BL
--- In hp_agilent_equipment@..., Brooke Clarke
<brooke@p...> wrote:
Hi BL:
I don't have experience directly with this connector but there are
a
couple of shielded connectors that use two contact pins.
One is called Twinax and the other is used on the R-390 tube type
military receiver. The following companies may be of help:
Have Fun,
Brooke Clarke, N6GCE
Date: Thu, 08 Jul 2004 04:32:42 -0000
From: "computeruser04" <computeruser@s...>
Subject: HP 3440A rear connectors
I have just acquired an old HP 3440A nixie tube rack mount DC
voltmeter. Although I have the service manual for the 3440A, the
rack
mounted version is physically different from the one in the manual
in
a few ways. For one - there are no inputs on the front panel, just
on
the rear. There are 2 different BNC type jacks that I have never
seen
before. The ground is isolated from the chassis so there are
actually
2 internal connectors along with the usual outer ground connector.
Both jacks have these 2 internal contacts but both jacks are
different styles. I've tried to look these up (google images etc)
and
have no idea what "type" they are so that I can get some kind of
adaptor to use a BNC terminated probe or even banana terminated
test
leads.
Thanks
BL
