开云体育

Use USPS flat rate international box Fill out content as "sample parts" value $10 Dont mention électronics J

No problem. Let us know what was the faulty component just in case somebody else will have the same issue in future. Regards, Razvan

Thanks.? I get 4 errors: 612, 613, 618, 619 Three of these have to do with resistance, maybe I needed to short the input, but as resistance works (I just tried with a range of high precision

I see the 'switch terms' can be obtain using skrf.vi.vna.hp.HP8510C ( https://scikit-rf.readthedocs.io/en/latest/api/vi/generated/skrf.vi.vna.hp.HP8510C.html ) so it'll be interesting to see how that

Hello Peter, Try to run a Self Test and see if it passes it. Could be anything but older 34401A have relay faults. The OMRON relays can be found but not the COTO relay. Newer 34401A had a newer

I have an Agilent 34401A which I've used at my bench for many years. Today I went to measure a 12 volt battery and it just started clicking. I tried it on a power supply and auto ranging works fine

Maybe. Ship printed circuit boards to Germany, from the U.S., using a 'Priority Mail International Flat Rate' medium box. (or small, or large too) AFIK, you gotta use customs form 'PS Form 2976-A' On

Hi Gary, I had similar problems from Canary Islands to Canada. They told me Canada would not allow electronics so I send the stuff to Germany with a friend and he could send it to Canada with DHL

Hi all, If anyone is interested, Sphere Electronics has some gpib cables going cheap. https://www.sphere.bc.ca/recently-added/ Regards, Warren

Polymer capacitors are readily available for voltages of 100 and under although modern low ESR electrolytics make perfectly fine replacements for tantalums and are, of course, available in a wider

I note the HP8510C driver, so i should be able to use this to access the 'switch terms. Also i'm interested to see how fast it reads the s-parameters! Thank you for this, N

However, when i run from the PC and file data, the first line in the s2p file is: !HP8510C.07.14: Aug 26 ?1998, so that indicates a different software version. (well the monitor is CRT, so pretty

I've been looking at scikit-rf to do the TRL calibration and it mentions using the 'switch terms' to improve the calibration. I'm just wondering, how do i read the switch terms from the HP8510C, which

Hey, in the past, I used Stackry and was happy with their service. MyUS was also great when it came to handling and shipping but their small print can inflate your budget. This is 5 yr old

Hi Ed, i did manage to get the NI GPIB / USB to laptop interface working. In terms of running the 8510C from the laptop it seems to work quite well but only with uncalibrated data. From the Operation

It is an analog to digital converter from the 4195A. Sent: Wednesday, March 5, 2025 9:32 AM To: [email protected] Subject: Re: [HP-Agilent-Keysight-equipment] HP PN

HP list, I have attempted to assist a current HP list member in Germany with boards from a 8660C. The Post Office is telling me they cannot ship electronics to Germany. (From the US). Parts,

Francesco, From the Keysight parts finder, the picture shows that part number has several discrete components on a circuit board. Three ICs, and numerous R and C. No commercial equivalent but might be

50+ years ago, 400 Hz power supply plugged into 60 Hz source. Runs for a few minutes and then throws its guts all over the bench. Back before the days of power supplies that work from 48 - 440 Hz, 100

Yep, I have seen the fireworks in the lab, too. Been a while, fortunately. More than 25 years ago we had a technician who installed a few tant caps backwards into a VMEbus chassis. Blam, molten