开云体育

Thanks to Rich & Nigel for your advice, I think there may be a problem with my NI MAX installation. The device doesn't have a GPIB ID and the toolbar is empty. I think I need to get that sorted before

Hi Lothar. I receive the package from artekmedia on 25/2 but no references to the power supply. Thanks anyway. Rui Martins Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________

The part for U75 on the HP54602A PCB is a DS1220 and should be read as a DS1220. The B model uses the DS1225. The DS1220 may be replaced by a M48Z12 available from Mouser. Sorry for the confusion.

Let me give you one piece of advice as far as ebay goes , don’t take the prices at face value , ALWAYS look for listings that have best offer enabled and throw a lowball offer on it , I had good

Hi Ruben, On my side, I have just finished the restoration of my 8350B and did a complete alignment. It meets all specifications. I also finished with the 83595A plugin, changed some parts and

E4401-90310 , you can order it from ARTEK MEDIA . Having said this however I am not sure if the PSU is documented Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows Sent:

Hi to all. I need the supply schematics for E 4401 analyzer. I think is the same for all the ESA or ESA-L spectrum Analyzers. Tanks in advance. CT1EBH Rui Martins. Get Outlook for

Hello, I have a HP54602A (not B) DSO that I need a binary or hex readout of the contents of U75 the evil DS1220 or M48Z18 battery backed lithium SRAM. Mine has gone flat. Anyone who has a 54600 series

There use to be a normalizer/offset Option 6 that could be purchased (see Ebay pic below)? Per the photo, this option was available with the HP5316A which included HPIB functionality.? The Option 6

Unfortunately, JPEG format graphic files are far less than ideal for this type of graphic. John's plotter emulator has been my go-to every time I need to grab a screen.? It makes it easy to

Could it be that you just need an alias for the USB-GPIB-HS to be identified as GPIB0? This is usually achieved in the NI software driver - you can download that from NI and install it – then in

Thank you for your words Yves, for now I have put the 8350B project on hold. I am looking for a plugin at a good price to continue checking current consumption. Again, best price tags are on the

Hi Lou: If you write Jon, KE5FX you will get a response, if none received here. I use ProLogix Adapters. As such I am not sure how much help I an be without having the adapter here to play with. Rich

Hi All, Still lost but I found this when I tried to start the HP7470A plotter and got a pop-up. I'm sure this must be bleedingly obvious to many of you out there but could someone direct me on how to

The spacing of the 2nd and 3rd columns has gone wrong - for example, first line should read: 44470 2 10 channel relay mpx 1 1

I have the following plug ins: IO plug short 44470 2 10 channel relay mpx 1 1 44471 5 10 channel general purpose relay 3 2 44472 2 dual 4 channel VHF switch 2 0 44473 3 4 by 4 relay matrix switch 3 0

Hi Martin, If you still need a manual, please let me know. I'd happily email it to you. -- Cheers, Tom -- Prof. Thomas H. Lee Allen Ctr., Rm. 205 350 Jane Stanford Way Stanford University Stanford, CA

I have a Leader 2316 FM stereo generator I auctioned-in some years ago. It does produce all the stereo signals with L and R external inputs. It looks very much like the Panasonic or National units,

Hi, I'm looking for help with the setup of the KE5FX software, I'm not really sure what to expect. I've installed a NI GPIB-USB-HS adapter and drivers on my PC. It shows up in the device manager as NI

If the same part-number is used in several instruments, it's the same part. There can be no exception to this rule ! The 1820-2131 imbedded code must detect whether the HP-IB hardware is installed (in