Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- HP-Agilent-Keysight-Equipment
- Messages
Search
|
Re: 5245 counter service manual
-----------------------------------
Dave, The only version of the HP 5245L that I've found on the LOGSA site is called the CP-772A/U (and maybe also the CP-772/U), which appears to be an H96-5245L. On the LOGSA site, they have only the parts-list manual for the unit. There are two other TMs for it that are NOT on line, there. Their TM numbers are listed in the parts-list manual, which is TM 11-6625-1682-24P. The downloadable parts manual, unlike many of the other LOGSA parts-list manuals, DOES have detailed board/component-layout and exploded view diagrams, with lists of part numbers. But for component values, you either have to decipher them from the part numbers or have a copy of the Federal Logistics (Fedlog) database. According the the Fedlog database, the 5245M is called the CP-1049P/U. But I couldn't find any manuals for it, on LOGSA, searching titles for CP-1049 and also searching by its NSN/NIIN numbers for the two 5245M versions listed. Good luck! Regards, Tom Gootee ----------------------------------- Date: Mon, 12 Jul 2004 17:35:27 +1200 From: "Dave Brown" <tractorb@...> Subject: Re: 5245 counter service manual Is USM-207 the correct designator? From a quick comparison there seem to be some quite significant differences between the 5245L and the USM207-so much so I doubt the USM 207 manual may be much use for a 5245L. Dave, ZL3FJ |
|
Re: 5245 counter service manual
Luis Pla Revuelta
Hi
toggle quoted message
Show quoted text
I have a copy of the service manual(5245L) plus manual changes until June 1979. I can scan the pages or schematics you need. Regards. El 12/07/2004, a las 19:06, Elbicon mfg co escribió:
Yes this is the one , |
|
Re: 5245 counter service manual
开云体育Yes this is the one ,
unfortunately logsa only seems to have a partslist
manual with exploded views etc ,? but no schematics !
Thanks anyway,? but to solve my problem i need
schematics ...
|
|
Re: 5245 counter service manual
computeruser04
I think the CP-772A/U might be the one we are looking for
BL --- In hp_agilent_equipment@..., "ericapple2004" <elbicon@p...> wrote: Hello group,service manual or schematics somewhere , 5245L would also do the job, |
|
Re: 5245 counter service manual
Jose V. Gavila
Hi Dave and all the List,
Is USM-207 the correct designator?I think it is not... When I was trying to repair my 5245M I fount a WEB page with links to the USM-207 manuals and, not, it is not same beast. It could be similar in design but definitely very different externally. Regards, JOSE ---------------------------------------------------------------------- 73 EB5AGV / EC5AAU - JOSE V. GAVILA La Canyada - Valencia (SPAIN) - Loc: IM99SM Vintage Radio: Vintage Test Equipment: European Boatanchors List: |
|
Re: 5245 counter service manual
Gary Beech
开云体育Hi
All,
May be
the USM-207 is similar but it is not the same beast.
?
perhaps someone can shed some light on this
?
73's
Gary VK2KYP
|
|
Re: 5245 counter service manual
Dave Brown
Is USM-207 the correct designator?
toggle quoted message
Show quoted text
From a quick comparison there seem to be some quite significant differences between the 5245L and the USM207-so much so I doubt the USM 207 manual may be much use for a 5245L. Dave, ZL3FJ ----- Original Message -----
From: "Gary Beech" <gbeech@...> To: <hp_agilent_equipment@...> Sent: Monday, July 12, 2004 12:39 PM Subject: RE: [hp_agilent_equipment] 5245 counter service manual Hi Brooke, I have also been looking for HP5245 manual, thank you for this information. Is there a list to convert from civilian numbers eg HP-5245 to the military number in this case USM-207 thank you 73 Gary VK2KYP -----Original Message----- From: Brooke Clarke [mailto:brooke@...] Sent: Monday, 12 July 2004 12:46 To: hp_agilent_equipment@... Subject: Re: [hp_agilent_equipment] 5245 counter service manual Hi Erik: Do a title search for USM-207 here: You'll find a number of manuals for the 5245 Have Fun, Brooke Clarke, N6GCE -- Date: Sun, 11 Jul 2004 09:48:24 -0000 From: "ericapple2004" <elbicon@...> Yahoo! Groups Sponsor ADVERTISEMENT < oups/S=1705083663:HM/EXP=1089643546/A=2128215/R=0/SIG=10se96mf6/* anion.yahoo.com> click here < :HM/A=2128215/rand=564925595> _____ Yahoo! Groups Links * To visit your group on the web, go to: * To unsubscribe from this group, send an email to: hp_agilent_equipment-unsubscribe@... <mailto:hp_agilent_equipment-unsubscribe@...?subject=Unsubscribe * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <> . ** The information contained in this e-mail message and any accompanying files is or may be confidential.If you are not the intended recipient, any use, dissemination, reliance,forwarding, printing or copying of this e-mail or any attached files is unauthorised.This e-mail is subject to copyright. No part of it should be reproduced,adapted or communicated without the written consent of the copyright owner.If you have received this e-mail in error, please advise the sender immediately by return e-mail, or telephone and delete all copies.Fairfax does not guarantee the accuracy or completeness of any information contained in this e-mail or attached files. Internet communications are not secure, therefore Fairfax does not accept legal responsibility for the contents of this message or attached files. ** |
|
Re: 5245 counter service manual
Gary Beech
开云体育Hi
Brooke,
I have
also been looking for HP5245 manual, thank you for this
information.
?
?
Is
there a list to convert from civilian numbers eg HP-5245 to the military number
in this case USM-207
?
thank
you
?
73
Gary VK2KYP
|
|
Re: 5245 counter service manual
Hi Erik:
toggle quoted message
Show quoted text
Do a title search for USM-207 here: You'll find a number of manuals for the 5245 Have Fun, Brooke Clarke, N6GCE -- Date: Sun, 11 Jul 2004 09:48:24 -0000 From: "ericapple2004" <elbicon@...> |
|
Help for 8557A
I posted an album with photos that I hope will make my question
clear. Please view and help me if you can. Any comments about this unit and general assistance with HP documentation would be welcome. I know the data is good in the HP manuals but it's like I have to learn to read all over again. Maybe I've studied too many Tektronix manuals.:) Thanks in advance for any help and comments. George Atlanta |
|
HP 8557A Spectrum Analyzer
Good morning Group,
I recently purchased a 8557A that looks to be in good condition but I don't have a display so I haven't been able to check it out. Neither have I been able to find a service manual but I do have a manual for the 8558A which at least is similar. My Question is, there seems to be a missing lead from the compression fitting labled LO OUT located on the top surface about in the center of the unit. Can someone help me to determine where this lead terminates. A photo of the top view of the unit would be great if you could e-mail a copy to me. Also what is the connector at the top left rear from the front view. It looks like some sort of interlock or a contact point from within the cabinet. I have a HP 180d scope frame on the way. Will the 180d have the necessary options required for the basic operation of this unit? Anyone with experience with this unit could be a very big help to me and I would appreciate it very much George Headley Atlanta |
|
Re: HP 8593A Spectrum Analyzer
Jeff Spence
开云体育No problem Clif. ? Jeff ? -----Original Message-----
From: Clif [mailto:clif@...] Sent: Saturday, July 10, 2004 11:09 AM To: hp_agilent_equipment@... Subject: [hp_agilent_equipment] Re: HP 8593A Spectrum Analyzer ? Thanks for trying and the link. I now have the manual.
After several |
|
Re: HP 8593A Spectrum Analyzer
Thanks for trying and the link. I now have the manual. After several
discussions with my web-hosting company it has been determined that to have a folder available for uploads requires some type of programming I'm not familiar with so I gave up. Again thanks, Clif --- In hp_agilent_equipment@..., "Jeff Spence" <jspence@p...> wrote: Clif and all,file) I looked for it on the web and found it at the following address:site. This may be a good resource for recently obsolete equipment.< 76/D=gr oups/S=1705083663:HM/EXP=1088797348/A=2128215/R=0/SIG=10se96mf6/*http :/compa nion.yahoo.com> click hereM=295196.4901138.6071305.3001176/D=groups/S= :HM/A=2128215/rand=514379723>subject=Unsubscribe of <> Service. |
|
Re: Digest Number 125
computeruser04
Looking at datasheets at Pomona & Delta - Thats what they are -
Twinaxial. Thanks for the response BL --- In hp_agilent_equipment@..., Brooke Clarke <brooke@p...> wrote: Hi BL:a couple of shielded connectors that use two contact pins.rack inmounted version is physically different from the one in the manual ona few ways. For one - there are no inputs on the front panel, just seenthe rear. There are 2 different BNC type jacks that I have never actuallybefore. The ground is isolated from the chassis so there are and2 internal connectors along with the usual outer ground connector. testhave no idea what "type" they are so that I can get some kind of leads. |
|
Re: Digest Number 125
Hi BL:
toggle quoted message
Show quoted text
I don't have experience directly with this connector but there are a couple of shielded connectors that use two contact pins. One is called Twinax and the other is used on the R-390 tube type military receiver. The following companies may be of help: Have Fun, Brooke Clarke, N6GCE Date: Thu, 08 Jul 2004 04:32:42 -0000 |
|
HP 3440A rear connectors
computeruser04
I have just acquired an old HP 3440A nixie tube rack mount DC
voltmeter. Although I have the service manual for the 3440A, the rack mounted version is physically different from the one in the manual in a few ways. For one - there are no inputs on the front panel, just on the rear. There are 2 different BNC type jacks that I have never seen before. The ground is isolated from the chassis so there are actually 2 internal connectors along with the usual outer ground connector. Both jacks have these 2 internal contacts but both jacks are different styles. I've tried to look these up (google images etc) and have no idea what "type" they are so that I can get some kind of adaptor to use a BNC terminated probe or even banana terminated test leads. Thanks BL |
|
Re: HP 8593A Spectrum Analyzer
Jeff Spence
开云体育Clif and all, ? After several attempts to email (my server doesn’t like that big file) I looked for it on the web and found it at the following address: ?
? It appears that Agilent has many documents of this type on their site.? This may be a good resource for recently obsolete equipment. ? Jeff ? -----Original Message-----
From: Clif [mailto:clif@...] Sent: Thursday, July 01, 2004 1:42 PM To: hp_agilent_equipment@... Subject: [hp_agilent_equipment] HP 8593A Spectrum Analyzer ? Does anyone have the procedure for replacing the
battery in this |
|
Info on 3852A Data Acquisition Extenders
I'm looking for information on the HP 3852A Data Acquisition / Control Unit extenders.? These are units that are "slave" to a master 3852A.? Specifically, I'm looking for a wiring diagram of the digital cable (is it simply a pin-to-pin connection?), and what are the requirements (model number, options, etc.) for extension unit? Any help would be appreciated.? Many thanks!? Tom Leedy? |
|
Want To Buy Old HP & Military oscilloscopes
Robert Middleton
开云体育Hello folks.
?
My name is Robert. Please allow me a few minutes of
your time, thank you. Is there anyone in the group who can point me in the
direction of finding one or perhaps a few pieces of?some HP equipment and
the manuals for them too??Perhaps there might be a electronics surplus
store that someone knows about that I could make contact with?
?
Below is the list of what I am looking for, some
are of military origin and others are commercial/Industrial. Cosmetic condition
is not real critical, even if the unit or units have some rust and are missing a
few knobs too is ok. I prefer working units if possible and also the plug in
modules too. I appreciate any leads and help I am able to receive. Thanks for
your time and have a nice day.
?
Respectfully, Robert
?
p.s. Here is a list of the models I am looking for,
and I am not picky either. Thanks again everyone. Also, I run accross alot of
newer and older HP equipment, probes, and manuals too so drop a line and let me
know what you need and I will do what I can to be of service to you folks by
being able to provide the equipment or putting you in touch with someone who
does?have it.
?
These are all old oscilloscopes, (heavy and
beautiful pieces of engineering) and depending on the price of the unit I am
also willing to pay the shipping cost, thanks folks.
?
OS-82A/USM-105
OS-121A/USM-140
OS-121C/USM-140
OS-121D/USM-140
HP-H12-175A
HP 185A
?
Plug in modules are;
?
MX-2930C/USM
MX-2930D/USM
?
?
I am also seeking manuals for these units?and the probes too.
?
I know I have another list with other models of
these HP Oscilloscopes and the HP modules too however I am not able to locate it
at this time. If anyone of you folks has one of these, or even a few of them or
if you know where I can locate one or more?or know of someone who might
have one be they working or not please contact me.
?
I am enclosing my e-mail address along with my home
phone number so one of you folks can reach me. I am also willing to call anyone
who might have any of these units so please forward me your phone number. When
you do call and if I am not at home please leave me your name, phone number and
a good time to call you back. Thanks again and you and yours take
care.
?
Respectfully, Robert
?
e-mail address is; romhifi@...
Home phone number is; 360-459-1874 |
to navigate to use esc to dismiss