¿ªÔÆÌåÓý

Thanks for all the ideas on shipping overseas, I will try some of the other definitions recommended on the custom form 1st. I did look into a flat rate box, the cost was about $85.00 for a medium

Hi jjoonthan, In using https://scikit-rf.readthedocs.io/en/latest/api/vi/generated/skrf.vi.vna.hp.HP8510C.html at the line in first line in the program vna =

Nah... 3-phase fed 500V raw DC rectifier stage in an 8kW TWTA, PSU let go. The flames reached the ceiling in the workshop! While the 32A wall breaker/RCD trip failed to open. We had a few such

I¡¯m not sure what German policies are, but in the US, repair/replacement parts are generally exempt. I¡¯d assume for that reason, that some companies have different part numbers for a standalone

Well here some examples (before Trump): If you buy in US something for 100$ & 25$ transport and use flat rate tax rate, then the receiver in Germany must pay import tax 22,50€ total = 22,50€ Sum

Use USPS flat rate international box Fill out content as "sample parts" value $10 Dont mention ¨¦lectronics J

No problem. Let us know what was the faulty component just in case somebody else will have the same issue in future. Regards, Razvan

Thanks.? I get 4 errors: 612, 613, 618, 619 Three of these have to do with resistance, maybe I needed to short the input, but as resistance works (I just tried with a range of high precision

I see the 'switch terms' can be obtain using skrf.vi.vna.hp.HP8510C ( https://scikit-rf.readthedocs.io/en/latest/api/vi/generated/skrf.vi.vna.hp.HP8510C.html ) so it'll be interesting to see how that

Hello Peter, Try to run a Self Test and see if it passes it. Could be anything but older 34401A have relay faults. The OMRON relays can be found but not the COTO relay. Newer 34401A had a newer

I have an Agilent 34401A which I've used at my bench for many years. Today I went to measure a 12 volt battery and it just started clicking. I tried it on a power supply and auto ranging works fine

Maybe. Ship printed circuit boards to Germany, from the U.S., using a 'Priority Mail International Flat Rate' medium box. (or small, or large too) AFIK, you gotta use customs form 'PS Form 2976-A' On

Hi Gary, I had similar problems from Canary Islands to Canada. They told me Canada would not allow electronics so I send the stuff to Germany with a friend and he could send it to Canada with DHL

Hi all, If anyone is interested, Sphere Electronics has some gpib cables going cheap. https://www.sphere.bc.ca/recently-added/ Regards, Warren

Polymer capacitors are readily available for voltages of 100 and under although modern low ESR electrolytics make perfectly fine replacements for tantalums and are, of course, available in a wider

I note the HP8510C driver, so i should be able to use this to access the 'switch terms. Also i'm interested to see how fast it reads the s-parameters! Thank you for this, N

However, when i run from the PC and file data, the first line in the s2p file is: !HP8510C.07.14: Aug 26 ?1998, so that indicates a different software version. (well the monitor is CRT, so pretty

I've been looking at scikit-rf to do the TRL calibration and it mentions using the 'switch terms' to improve the calibration. I'm just wondering, how do i read the switch terms from the HP8510C, which

Hey, in the past, I used Stackry and was happy with their service. MyUS was also great when it came to handling and shipping but their small print can inflate your budget. This is 5 yr old

Hi Ed, i did manage to get the NI GPIB / USB to laptop interface working. In terms of running the 8510C from the laptop it seems to work quite well but only with uncalibrated data. From the Operation