开云体育

Which plug ins do you have? I might have some terminal blocks laying around

Jinxie, Your spikes do sound a lot like what you'd see from excessive probing inductance caused by a large loop area from the ground lead. One simple test I often do to determine whether my probing is

In the 1983 catalog, HP lists 2 different sets of BNC cables: the 10501/2/3A series and the 11170A/B/C series (p. 640). Both are listed as using 50ohm coaxial cable. The first series says it uses

Might not be a bad idea to look up and review Bob Pease's article(s) on this. Grounding was a particular concern of his and he wrote several very good articles explaining the concepts. Cheers! Bruc

(It would be helpful to quote the email that you're replying to. Hint: This is a mailing list, not a web forum.) I don't mean this the way it's going to sound, but most people don't see what it's

Thanks for fast reply, can I be cheeky and ask what plugins you have...? Regards Nigel Sent from my iPad by banging a nail into a piece of wood...

I have three 3488 switches and a selection of plug ins. I recently bought a well loaded 3488 at a pretty good price from Ebay in the UK. I would love to be able to buy some of the connector blocks for

I'm not too sure what Harke means. I don't see what shorting the tip to the ground is going to achieve. I'm probing A17 and A18 boards and there is simply nowhere other than nearby aluminium chassis

Interesting article/posting. Do you have the 3488 switch with the vhf switch modules? Nigel Sent from my iPad by banging a nail into a piece of wood...

Here's a link to a blog of mine elsewhere which I hope some on this group may find interesting. It covers some (initial) work on the 8903A and my take on yet another USB - HPIB interface.

Most graphic programs use (or used) to open hpgl files... Enviado do meu Tele-Movel Em dom, 27 de fev de 2022 13:19, Rich Miller via groups.io <av8torrich= [email protected]> escreveu:

I don't believe you'll need new drive belts, afair, these belts are made from a kind of cloth + some rubber, they never lace or deteriorate. I service drives here and in some hundreds of tm100 and

Hi Steve: I have Jon's Software. I use it for some older Tektronix and Advantest instruments I own. I always thought it was designed to be used with a GPIB interface. Let me load this up, and see if I

Try KE5FX. A Google search yields the first hit at his GPIB toolkit, which includes a reader that will take an HPGL file and display it under Windows. Steve Hendrix

Thanks Jon, I'll do further tests. -- Cheers Attilio

I've not watched the video, but from what you describe, this is probably "injection locking". -Dave -- Dave McGuire, AK4HZ New Kensington, PA

On 2/27/22 07:58, Jinxie wrote: > Some of you will be aware I was trying to find the source of the YTO unlock error I was getting displayed on the screen of my 8566B. I'd been advised elsewhere to

Jinxie, Have you measured with the earth clip directly connected to the probe's tip? Close to the area you are looking at. You will be surprised what you see. As you say you measure the same at any

All: I was reading about the .FP file my generator produces when I want to copy a Plot. My understanding is they are HPGL file format. A review of how to open this format into a graphic, or plot the

Atillo the leakage inductance of the transformers under test,are,an issue at high end of band. If you short the transformers secondary you can measure series leakage inductance with a meter or RLC