开云体育

I know next to nothing about the software interfacing and capabilities of the HP 3458A. Still, I'll try and help a little. Unfortunately, your setup still isn't clear to me. Are you making voltage

Hello Sam, Group, Regarding failure to use Lifutil.exe on "DOS" machine: When downloading "1650_51B_V2.11_OS_SYS.zip" from HP-A-K website you get the LIF Utilities A.00.00, known to be quite fussy (to

Have a look at the GR 1606-A manual: http://jamminpower.com/PDF/GR%201606-A.pdf

It is not Signed Integer but a probably obsolete Single Integer format. It is note on page 98 of this manual; http://exodus.poly.edu/~kurt/manuals/manuals/HP%20Agilent/HP%203458A%20User.pdf

I am changing an existing program which has a SINT value of 558 added to a value (which is 0.051 V in this application) the current program line is V(N,2)=X(1,1)+558 Yes, the program as it now is,

What makes you think you need to use a (signed) integer at all (if that is indeed meant by SINT)? Do you need three times the reciprocal of X: "3 / X" or the reciprocal of three times X: "1 / (3 *

What is single integer representation? Still think you mean Signed INTeger representation. Raymond

Are you talking about algebraic correctness or HP 3457A syntax? As it is, I don't think your expression matches what you want to achieve, algebraically. I guess SINT stands for signed integer. That

I have another idea.? The purpose of using noise as a signal source is so that the frequency of interest can be selected by the detector/receiver.? The same thing can be accomplished with a signal

SINT is single integer representation of a number. Is is (was?) used in HP instruments to compress numbers for max data flow. Beyond that it is convoluted as far as I can tell!

Hello-- Please excuse my ignorance, but what is a "SINT"? Is it anything like a Smoot? 73-- Brad AA1IP

I guess I should have mentioned, this is for a HP 3457A multimeter.

Robert, Thanks for telling me, but I suspect the shipping cost (based on your callsign) would make the cost prohibitive.? I am in Los Angeles. So my intent is to use the main dial on an old cheapie

I am changing an existing program which has a SINT value of 558 added to a value (which is 0.051 V in this application) the current program line is V(N,2)=X(1,1)+558 I need to multiply the x value by

To J.L. Trantham: Who did your 8482 service in California back in 2009?

I'd say about the same link... Btw...it is my blog :D Em 08/10/2015 12:18, "'William Stillwell' wkstill@... [hp_agilent_equipment]" <hp_agilent_equipment@...> escreveu:

hi, Can you ship one to Denmark ? best regards helge 2015-10-08 20:17 GMT+02:00 robert8rpi@... [hp_agilent_equipment] < hp_agilent_equipment@...>:

Thanks! I've searched with a lot of keywords but maybe too english... I've just contacted the author, i will wait now.

Hi Bob, I have some Hammarlund 25pF to 250pF precision variables. They are straight law with built-in anti-backlash reduction gears. They came from aircraft fuel quantity gauge test sets and look like

"Link on bottom of page for software?", yes, but link has expired. One might try contacting the author though