开云体育

2 questions please? 1. Is ftp.bluefeathertech.com down? I am unable to connect! 2. What is the prom type in the 8568B? Can I use 27xx type? Many thanks, Mark

Mike, I wanted to thank you and Agilent for doing such a good job with the old manuals. It is such a treat for those of us who have and still use the HP/Agilent test gear professionally to also be

Mike, Contact me at peterawson@... re: LD121CJ. Pete Rawson

Don C. Contact me at peterawson@... about the 11593A terminations. Pete Rawson

Looking for two of these 50 Ohm terminations - the ones that are supplied to Terminate the BNC sockets on an 8555A. Cheers!.........................................Don C.

I have a great update for everyone using the older logic analyzers. We've posted many of the O/S disk for these products. Here's a quick update: 1650_51A DONE 1650_51B DONE 1652_53B NOT DONE -- should

Hi, The same chipset was used by Tektronix in the DM501A DMM. It might be easier to find a DM501A than the chips. Good luck, 73 John Barnes VE3XRY

Hello Mike, I bought a set from a local (Spanish) supplier a year and a half ago... I will check if they still have some. Not cheap but far from $250 :-)! Regards, JOSE

Hi! Here is a link to AGILENT, the company which has take over some HP fuctions. helmut_koenig@... Hope he can help Richard ----- Ursprüngliche Mail ---- Von: g0mjw <m.j.willisrl.ac.uk> An:

$14 for a plastic strip that is worth about $.15? Youch! One of my 8656A was missing the strip also; I think it's a case of people not being careful when they remove the strips (but I did without

I an repairing an 8559A that I acquired recently, unfortunately the LD120CJ ADC chip has filed, possibly also the LD121CJ as well. Does anyone have spares? I have tried the usual surplus outlets and

--- Mark <marks@...> wrote: --- Mark <marks@...> wrote: One description for it is "top frame plastic piece". By the early 90s it had become a slightly lighter color plastic than earlier.

Hi Guys, I have done this with my CR70, and the CRT in my HP8505A. It works very nicely. I pulled the socket off of the CRT, and used the universal adapter, which is a bunch of micrograbber clips, and

Hi, Mark -- You may find this page interesting: http://www.ke5fx.com/crt.html -- the procedure has been done on at least one other 85662A since I wrote it up, with good results. If you get the CR70

I have a 85662 with a weak tube. I finally managed to obtain a Sencore CR70 off eBay. I mean I have bought 3 of the CR70 on eBay over the last 12 months, and the first 2 never turned up! Now cr70's

Can someone please advise me what the plastic strip along the top of circa 1980's HP equipment is called? It usually covers the screws that hold the front panel on. It also enables other test

Thank's Erik I appreciated the information very much. I m still a fan of the old measuring HP equipment:). regards ON1EV wrote: circuits. that is pushbutton (upper

On Thursday 07 December 2006 21:15, on1ev wrote: Hello ON1EV There is a demonstration plot function which test most of the circuits. quote+- - make sure there are six pens in the carousel (i do not

hello, I'm looking the way to make a self test on a HP 7090A measuring plotter equipment ? any help will be appreciated cheers to all ON1EV

Many years back I had a Sun 2 (2/120?) server in the lab, that really took some beating. it was about 12" wide, 24" deep and 36" high, and fitted with (IIRC) thirteen 5" fans, six in the power supply