开云体育

im looking for a 15 pin card extender for trouble shooting a hp 310a wave analyzer its working but still has some "issues" and it would be nice to be able to scope the cards i fixed it so far by

Hello HP specialists and others , My 70001 mainframe has such powerfull fan's , (BEARINGS are OK!!!) that the noise equals my Nilfisk Hoover (Brand name's , suppose you all know what i want to point

Hi Steve, To see what you are dealing with, turn on your oscilloscope, set its sweep speed to 10ms/dividion, set its vertical deflection to 0.5 V/division, and with one hand, grab the tip of your

Tu peux m'appeler si tu veux ou si tu es en mesure de le faire... -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/

Sorry my last message was mysteriously truncated! HP has a Firmware Upgrade (08560-60090) for 856xE http://www.home.agilent.com/agilent/editorial.jspx?cc=US&lc=eng&ckey=475\

Hi all. A bit off the HP theme, however need some help. I have a Time 63132 rf (active) mixer. It also has an alt. part number of DXM602. The LO and RF appear to be in the 10-20GHz range. If anyone

One stock fault in HP printers is the print head slide bar becoming sticky. That's the chrome rod about 1/4" dia that running across the printer. Try wiping it clean with a tissue, that usually clears

I forgot to mention that it was only a real problem because it was quite low over the bench and the cables to the lights wound around the back and side of the bench, plus they were the old inductor

Thanks Mike and others for the advice, it's most helpful and educational. I didn't realize that fluorescent lighting could be a problem. In any event, I'm not using that kind of lighting. I will take

Good site for that type of issue is http://fixyourownprinter.com . They sell service kits for most HP and other models, at least for Laserjets. Pickup rollers seem to be a common trouble spot. --

Greeting, My favorite printer has stopped picking up sheets from the paper tray. Any suggestions or advice? Jerry --------------------------------- Any questions? Get answers on any topic at Yahoo!

Hi Erik, You can find a copy of "Modular Measurement System HP7000 Family Catalog" at the TestMart website ( http://www.testmart.com/library/ ). At the bottom of the page, you will see a section

Alexander, This is another product that I used to work on during my days in Colorado Springs :-) I can't find the file within our intranet, but will send a request to the division support engineers. I

Hello group, Anybody has or can provide a scan / pdf of : mms catalog hp (modular measurement system ) (discontinued) part 5965-2818E ? Many thanks, Erik

After several careless incidents with soldering irons, I started using fireproof table tops (with static mats on top). It was some kind of laboratory table-top, a mix of asbestos and resin, that was

That was all very interesting - particularly that a 1M-ohm mat was susceptible to fluorescent light e-m. Two points that are worth making to clarify: 1. The reason that Al foil is bad is that any

have been through this a couple of times in last 20 years, a. Using a static mat from 3M or one of the top companies that supply to HP and others is the best recommendation, those mats allow static

All computer items (the Proliant and the Suns) are now spoken for. The plotter is still available. Thanks much. -=-=-=-=-=-=-=-=-=-=-=- Bruce Lane, Owner & Head Hardware Heavy, Blue Feather

Fellow Techies, I've said it on my web site, and I'll say it here: Scrounging is not so much ongoing acquisition as it is a 'flow-thru' of goodies. Any tech-scrounger will eventually hit the point