Re: 8566 to measure 100W FM transmitter
|
I built one of these:
You might want to use a larger resistor and make it a 50 dB tap. I use that for my amp output. Of
course you have to calibrate it using a SA and TG or a VNA because the
attenuation is not exact, but I have had good results through HF feeding
the output to a SA or 50 ohm scope input.
Regards,
Mark W7MLG
I should add the 100W will be driven to an antenna on a tower, I don't have a sampler so I'm limited to what I can sample, hopefully the transmitter has a sample port
|
