Hi Staffan
Yes, you need to meter to be in addressable mode (or as you say,
"normal").
If you use the interactive IO, you would use the "Send and Read"..?
Type the command to fetch the reading in the text box, and use the
"Send and Read" button, which will set the computer as the talker,
send the command, and then it sets it up so the meter is the
talker.? You should see the results show up in the history below.?
It puts the actual results there, with no additional formatting so
you can see exactly what it sends back.? Of course you can also do
it individually using the separate "Send Command" and "Read
Response" as well. The "Send and Read" just combines the two
actions.
What language do you plan to use for your program?
Daun
On 11/17/2018 4:52 PM, Staffan wrote:
Hello,
Just got hold of an old HP436A power meter and would like to do
some automated measurements. Controlling the instrument is simple
using the 82357B USB-GPIB module (I can set range etc), but
reading data? As a first step I'd like to test using Agilent
Interactive IO from Connection Expert. If that works, I'm fairly
sure I can get it working in a program also.?
The 436 is set to NORMAL, i.e., not TALK ONLY. It does have the
HP-IB option 022 installed. My guess is that I need to address the
instrument to Talk in some other way than the "Read Response" used
in Interactive IO.
Anyone with experience of this?
Regards,
? Staffan
--
Daun E. Yeagley II, N8ASB
