¿ªÔÆÌåÓý1. Quan (300). 12" long, RG-214, Male-N
(straight) to Male-N (90-degree) with Huber-Suhner connectors !
$40 for 5. 2. Quan (20) Flexible solid semi-rigid Female-N to Male-SMA jumpers (asst lengths, ave ~12"-~20"), These use Huber-Suhner connectors (excellent quality). Also the semi-rigid coax can be soldered to using normal solder which means the coax and/or connectors can be re-used ! $4.50/each
3. Quan (50) Flexible solid semi-rigid Male-N to Male-SMA jumpers (asst lengths, ave ~12"-~20"), These use Huber-Suhner connectors (excellent quality).? Also the semi-rigid coax can be soldered to using normal solder which means the coax and/or connectors can be re-used !? $4.50/each 4. Quan (35) Brand New, Mini-Circuit 12 dB N-Female to N-Male connectors, DC-6 GHz. Swept these and these are SPOT on ! Really excellent attenuators. $10/each.
5. Quan (14). INMET Model 3070M, DC-18 GHz terminations NOS in plastic bags. Will handle 2 watts, $12/ea. 6. Quan (2), Radial high-performance SP6T
uW relays w/LED indicators. Rated at 240 watts (ave pwr) up to 3
GHz, and 100 Watts (ave pwr) up at 18 GHz, port-to-port
isolation of 80 dB (down to 60 dB at 18 GHz). The coils draw
about 100 mA and each relay contact is rated for up to 5 million
cycles. What makes these relays really
neat is that they have a small PCB mounted to the contacts
already ! The PCB uses a standard 2 mm, 20-pin DIP connector to
access all of the required contacts and there are 6 LED's that
indicate which port is being energized. Last two available,
$25/each.
7. Quan (16) same relays as above but with NO LCD PWB mounted on relay.....$16/each. 8. Quan (40) Anritsu Dual-Coil "Quasi SPDT" 13 GHz SMA relays. What makes these relays fascinating is the way the contacts can be energized. The control connector is a 3-pin Molex type. The center pin is common. One side of center will energize one coil, the other side will energize the other coil. In the un-energized condition the two "output" ports are tied together and grounded. As soon as one side is energized a connection is made between the common SMA port and one output SMA port. One or two ports can be connected to the input (common) SMA port. Because this relay has two independent coils (one for each port) you can energize one coil, or two, and use the relay in a number of different ways. Either AC or DC can be used & the coil draws about 30 mA at 12 VDC. Will pull in as low as around 6-7 VDC and not get as warm. They have a very nice 1/8" thick aluminum mounting plate making mounting them a snap. $12/each. PayPal or personal/company check aok as always. All I ask is if you tell me you want something PSE be prepared to let me know ASAP & be prepared to pay for your item(s). Gedas, W8BYA Gallery at Light travels faster than sound.... This is why some people appear bright until you hear them speak. |
