Does this look like the part?
The price seems reasonable.
Glenn
On 10/21/2017 7:41 PM,
jehancoc@... [hp_agilent_equipment] wrote:
OK, so the award goes to Glen to who called it correctly.?
Though the problem manifested itself as low 12V, the issue
was in the -10V supply.? This caused a 120Hz pulse in the -5.6V
(approx.)?voltage to the reference circuit?for the 12V
regulator.? I didn't have the correct cap but I swapped in a
4,000uf (13,000uf required) and up it came albeit with noise
sidebands from the lack of filtering.
So where can I find a MEPCO/CENTRALAB 13,000UF 25Vdc 30 surge
cap?
Thanks for all the help.?
Jerry
--
-----------------------------------------------------------------------
Glenn Little ETCS(SS) USN Ret, ARRL Technical Specialist, SBE ARRL TAPR
Amateur Callsign: WB4UIV wb4uiv@... AMSAT LM 2178
QTH: Goose Creek, SC USA (EM92xx) USSVI, FRA, NRA LM QCWA LM 28417
"It is not the class of license that the Amateur holds but the class
of the Amateur that holds the license"
---------------------------------------------------------------------------
