I waiting to get it, I 'm pretty excited, but also concerned it will need repair.
In the listing I note is the display has error code of? CE-1. The manual says,
"Operator error, Attempt made to Manualy change the FULL SCALE while in Auto Range"
So I hope that is not a real problem.
? I will be changing the WECO input connectors to BNC. I note the unit is 75 ohm, I'll be working with
50 ohms.Is it wise to put a 50 ohm to 75 ohm L pad internal when I install the BNC connector?
And then note, "all measurements are MINUS5.72 DB".
?What would I add/subtract if I just plugged a 50 source into the 75 ohm input?
??????????????????????? Thanks, Lamont
.
