Re: Hp 70909A vs 70910A
开云体育Hi Adam Thank you for the information about the memory card required as being ?a 128K memory card I am not a software guy or very pc literate so the listings below mean nothing to me, but I have been told the only way to talk to the 70900 is by using a hp 9000 computer running basic 5.1 I have a VIPER card that I haven’t used but I am told that that will not do the job 2 hp 9000 computer systems on for me another for someone in the uk that is more skilled than me ? We might have to re list this topic under as 70900 software & 70910? personality software ? I did put out a line once for the person that originally rote the program but unfortunately she doesn’t appear to be on this site ? Paul B From:
hp_agilent_equipment@...
[mailto:hp_agilent_equipment@...]
? Thanks Paul, ? I'm located in the Panhandle of Florida, in Shalimar which is just north of Destin on the Bay. ? One mistake in my previous post is that the total size of the files on the internal memory is closer to 115K rather than 700K.? These files would all fit on a 128K memory card if I can locate one. ? The issue I'm experiencing is that the firmware within the 70900A seems to be a modified subset of RMB that does not seem to support standard file transfer functions such as those that allow copy of files between storage devices.? So even if I did hook up an HPIB disk or obtain a 128K card for the 70004A, I don't see how I would instruct the 70900 to copy the files somewhere other than the internal storage. ? This is troubling because I know the internal lithium 3.6V battery is likely to be near the end of it's life, and from what I read in the manual, the RX_Mode program (as well as all other DLPs on the internal memory) will be lost. ? As for RMB, I do have several machines that run this natively on the 68K processors (VIPER card, 382 VXI system, etc).? But I don't see how these would help over the GPIB?? Separately, I am interested in obtaining the calibration software, which I expect I can run on these machines. ? The firmware in this 70900A is Rev 960418 (B.06.03). ? I am talking to the instrument via GPIB and ran a CATALOG? which produced the following listing.? ? 0876544,0760828 CONFIG,CONFIG,0012938 LARGEST,LARGEST,0760810 ,AG???? 00042 A_AT__,G????? 01436 A_CF__,G????? 00296 A_DELETE__,G????? 00242 A_I_GAIN__,G????? 00106 A_I_OFF__,G????? 00108 A_IQ_QD__,G????? 00106 A_IFBW__,G???? ?01512 A_NFMOFF__,G????? 00190 A_Q_GAIN__,G????? 00106 A_Q_OFF__,G????? 00108 A_RECALL__,G????? 00306 A_SAVE__,G????? 00244 A_SP__,G????? 00250 A_VBR__,G????? 00188 A_WFMOFF__,G????? 00190 AT_AUTO__,G????? 00054 AT_MAN__,G????? 00052 A_SG__,G????? 02806 A_VB__,G????? 01500 BEGIN_RX__,G????? 00532 CUST_FLTRS__,G????? 00170 DELETE__,G????? 00158 DEMOD_AM__,G????? 00172 DEMOD_IQ__,G????? 00420 DEMOD_NFM__,G????? 00272 DEMOD_KEYS__,G?? ???00518 DEMOD_PU__,G????? 00178 DEMOD_WFM__,G????? 00272 DISP_MSG__,G????? 00162 DSP_ONOFF__,G????? 00454 GET_MSI__,G????? 00240 H__,G????? 18708 INSTALL_IP__,G????? 00156 MSI_HPIB__,G????? 00230 MSI_INT__,G????? 00228 MSI_MSIB__,G????? 00230 OPTIONS__,G????? 00118 PR_ONOFF__,G????? 00252 PRESEL__,G????? 00234 RD_CPL__,G????? 00854 RECALL__,G????? 00158 REDISP__,G????? 00328 RFIF_GN__,G????? 00962 RUN_TMPCMP__,G????? 00120 RX_BW__,G????? 00616 RX_BW_MORE__,G????? 00550 RX_DEMOD__,G????? 00172 RX_FREQ__,G????? 00520 RX_GAIN__,G????? 01100 RX_HELP__,G????? 03066 RX_MISC__,G????? 00512 RX_MODE_,G????? 00150 RX_RTN__,G????? 00338 RX_RTN_LS__,G????? 00210 RX_RTN_NS__,G????? 00282 RX_RTN_FS__,G????? 00148 SAVE_RCL__,G????? 00468 SET_ONEOS__,G????? 00082 SAVE_STATE__,G????? 00202 SAVE__,G????? 00144 SG_AUTO__,G????? 00054 SG_MAN__,G????? 00052 SHOW_ANNOT__,G????? 00098 SHOW_VERS__,G????? 00118 RX_ERR__,G????? 01562 RX_INIT__,G????? 01808 RX_SV_RCL__,G????? 08346 RXRMT,G????? 09810 SHOWRX__,G????? 09772 TEMP_COMP__,G????? 00274 TOP_KEYS__,G????? 00314 TRAVGONOFF__,G????? 00296 UNITSKEYS__,G????? 00702 UNITSMENU__,G????? 00118 UNITS_CPL__,G????? 00274 UNITS_DBM__,G????? 00120 UNITS_DBMV__,G????? 00122 UNITS_DBUV__,G????? 00122 UNITS_V__,G????? 00120 UNITS_W__,G????? 00120 UPD_SCRN__,G????? 00442 USER_KEY__,G????? 00226 V_AF_FLAG,G????? 00048 V_AT,G????? 00048 V_AUNITS,G????? 00048 V_CF,G????? 00048 V_CFKEYSET,G????? 00048 V_COUPLED,G????? 00048 V_DEMOD,G????? 00048 V_DISP,G????? 00048 V_HELP,G????? 00048 V_I_GAIN,G????? 00048 V_I_OFFSET,G????? 00048 V_IFB,G????? 00048 V_IF_GAIN,G????? 00048 V_IQ_QUAD,G????? 00048 V_KEYSET,G????? 00048 V_MENU,G????? 00048 V_MSI,G????? 00048 V_ROFFSET,G????? 00048 V_NFM_OFF,G????? 00048 V_OPT_FM,G????? 00048 V_OPT_IQ,G????? 00048 V_PR_COL,G????? 00048 V_PR_INPUT,G????? 00048 V_PR_ROW,G????? 00048 V_Q_GAIN,G????? 00048 V_Q_OFFSET,G????? 00048 V_SG,G????? 00048 V_SP,G????? 00048 V_TRAVG,G????? 00048 V_VB,G????? 00048 V_WFM_OFF,G????? 00048 VOID__,G????? 00040 WBIF__,G????? 14844 u_910,G????? 00884 V_911_CAL,G????? 00048 V_911_COL,G????? 00048 V_911_REV,G????? 00048 V_911_ROW,G????? 00048 ONWINDOW,DG???? 00050 TRD,G? ????02084 s_1,G????? 01122 SA_s_0,G????? 01122 CUST_FLTR,G????? 00376 PR_ON_AC,G????? 00520 PR_OFF_AC,G????? 00520 ONEOS,G????? 00064 ONUSER,G????? 00052 ? Thanks ? Adam ? ---In hp_agilent_equipment@..., wrote : Hi Adam Regarding 70000 I have not spent any time on the subject over the summer due to other commitments so Firstly could you let the group have your general location so that local help might be found as I am no expert? ? I am told you require a HP 9000 computer system running basic 5.1 or later a hard drive and a floppy either 5.25 or 3.5 and I am well on the way to achieving this Please note the hard and floppy drives for the HP 9000 computer system are very fragile and I haven’t found any replacements ? Regards Paul B From:
hp_agilent_equipment@...
[mailto: hp_agilent_equipment@...
] ? Paul No virus found in this message. No virus found in this message. |
Paul Bicknell