Brad
The std 180 mainfrme power xfmr (according to my handbook, for s/ns prefix 975- and above) is 9100-1129 (I think-may not be reading this correctly). This is a dual voltage 115/230 primary. The alternative, for slightly lower mains etc(e.g. 100 volt) is 9100-1109. No mention of 9100-0154, but it may have been in earlier models.
From the cct the xfmr secondary winding details as follows-
10vdc/50mA, 122.5vdc/300mA, 25vdc/1.3A, 19.5vdc/1.1A, 120vdc/170mA and 6.3vac/500mA, 4.5vac/120mA.
Note the spec in terms of dc out for most windings.
73
Dave, ZL3FJ
toggle quoted message
Show quoted text
----- Original Message -----
From: "Brad Hernlem" <alibhernlem@...>
To: <hp_agilent_equipment@...>
Sent: Tuesday, September 21, 2004 1:24 AM
Subject: [hp_agilent_equipment] XFMR part #9100-0154
I have a large transformer with
part number 9100-0154 for which I seek pinout and rating data. I
think that it MAY have come from a 180 series oscilloscope.
Can anyone here help me out?
TNX
Brad
------------------------ Yahoo! Groups
Yahoo! Groups Links
