(Changing the subject from spectrum analyzers to logic analyzers)
On Thu, Jan 17, 2013 at 7:51 PM, Harvey White <madyn@...> wrote:
On Thu, 17 Jan 2013 22:44:04 -0500, you wrote:
Logic analyzers are really cheap compared to spectrum analyzers, though.
The 16500C is such a terrific deal on the used market because it has
Ethernet and no need to fuss with getting a PC with an HP-IB card or a
converter set up. (And you can put an okay if not great digital scope in
it
too.)
So point me at one for fifty bucks, and I'm in.... (seriously, I do
have a 16500B.......)
However, have you priced the blades?
They're not all that cheap unless you go for very early models, and
those have (to me) serious operability issues....
I'd start with the 166x series (myself), but I do like the 16500B (at
least) for the touchscreen interface..... The blades can kill you for
price, though.
Harvey
The problem with a 16500B or 16500C for $50 if you find one at that
price you could easily pay that much for shipping if it's not local.
And if you don't pay that much for shipping it might be poorly packed
and get damaged during shipping. If you could also find a 16700A for
say $150 plus $50 in shipping in my opinion I would most often rather
have a bare 16700A for say $200 total than a bare 15600B or 16500C for
$100 total.
"Blades" is not a term I have generally heard for the 16500/16700
series modules, but I'll go along with that. What do you think is a
reasonable price that won't break your bank for say a fully functional
16555A module with the POD1/POD2 and POD3/POD4 cable sets, but without
the breakout lead sets and grabbers? I ask because I have many more
16550A and 16555A modules than I have any need for that I should
unload. Also have excess 16700 mainframes. Located in WA, USA.
Also, regarding network control of 16500B / 16500C, you can only do
that on the 16500B if it has the optional 16500H or 16500L LAN
interface installed. Not all of them have that installed. If you do
have that one of the ways you can control the analyzer is to FTP a
plain text file containing a set of programming commands to the
\system\program file. I've used that in the past to create new
configuration setups. I have found it much easier at times to keep
editing a text file and sending that to the analyzer to refine a
complicated configuration than to poke around at the touch screen
interface. For reference, see 16500H Interface Module LAN User's
Guide (May95), 16500-97013.
-Glen
