Yes.
The Tek DPO, based on the 7704 (or possibly the 7704A) was the first AFAIK.
Then there was the magnificent 7854. IMO, this is the BEST lab 'scope
ever made. It is still my 'scope of choice.
The downfall of both of these units was the relatively slow A/D by modern
standards.
There were also some Transient Data Digitizers that used specialized
double ended CRTs, I think.
-John
=============
toggle quoted message
Show quoted text
Did HP (or Tek, or anyone for that matter) make any oscilloscopes that
were
basically analog scopes, but with the ability to digitize what is seen on
the display (at some lesser resolution than what you might be able to see
on the actual display, presumably)? As I understand it - which may
admittedly be incorrect - some of the older spectrum analyzers are sort of
like this.
So, this hypothetical oscilloscope type would basically have the analog
display "in parallel" with an ADC, such that you could look at the screen
and see the waveform displayed like an analog scope, or use the ADC to see
a digital approximation. (Presumably the digital stuff could also be used
to capture and store one-shot things like a regular digital oscilloscope.)
This would be opposed to a purely digital oscilloscope where the ADC and
memory is always between the signal and the display.
The reason for doing this, of course, would be that the analog display
would be "higher resolution" than the ability of the ADC, but the digital
stuff would enable automation and storage ability. This would stop being
important once digital was high-enough resolution to look more or less
indistinguishable to humans.
Did such "hybrid" oscilloscopes ever exist? If so, what are some model
numbers?
Thanks for your time - sorry if that was a bit lengthy.
