开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

Re: HP 8551 Spectrum Analyzer FS or trade?


 

Max - not the 8551. It came with an 851 display on top. you can google
it.

will

In a message dated 12/28/2012 2:08:58 P.M. Pacific Standard Time,
max@... writes:




Hi Daniel.

If I remember correctly, and more and more lately I don't, the 8551 came
with different front end modules for different frequency coverage's. What
is the frequency range of yours? If it fits my needs I would be willing to
pay for professional packing and the shipping charges to get it.

Regards.

Max. K 4 O DS.

Email: _max@... (mailto:max@...)

Transistor site _
()
Vacuum tube site: _
()
Woodworking site
_
()
Music site: _
()

To subscribe to the fun with transistors group send an email to.
_funwithtransistors-subscribe@...
(mailto:funwithtransistors-subscribe@...)

To subscribe to the fun with tubes group send an email to,
_funwithtubes-subscribe@...
(mailto:funwithtubes-subscribe@...)

To subscribe to the fun with wood group send a blank email to
_funwithwood-subscribe@...
(mailto:funwithwood-subscribe@...)

----- Original Message -----
From: "Daniel Koller" <_kaboomdk@... (mailto:kaboomdk@...) >
To: <_hp_agilent_equipment@...
(mailto:hp_agilent_equipment@...) >
Sent: Friday, December 28, 2012 8:44 AM
Subject: Re: [hp_agilent_equipment] HP 8551 Spectrum Analyzer FS or trade?

Hi folks,

Is there really ZERO interest in an HP 8551 spectrum analyzer? Given that
I
didn't even get any comments from this usually vocal group, and having
found
some replies to older posts that went into my spam folder, I figured I'd
just ask again (copied below). Perhaps a few more people are back from the

holidays as well.

Please do let me know if the group consensus is that this thing is really
just a useless boat anchor even by vintage instrument standards.

Thanks and have a happy new year!

Dan

________________________________
From: kaboomdk <_kaboomdk@... (mailto:kaboomdk@...) >
To: _hp_agilent_equipment@...
(mailto:hp_agilent_equipment@...)
Sent: Saturday, December 22, 2012 12:48 PM
Subject: [hp_agilent_equipment] HP 8551 Spectrum Analyzer FS or trade?

Hello all,

I have an HP 8551 spectrum analyzer I would like to offer for sale or
trade.
It works reasonably well, as I describe in more detail below, but I am
starting to upgrade my home shop with more "modern" equipment.

Cosmetically, the unit is clean, with some sticker residue on the display
units. It comes complete with all the necessary interconnecting cables and
the oval power cords. It weighs a TON. The RF unit alone is 90 lbs, so I
can't really ship it, even in parts. However, I live in Charlottesville,
VA, and I frequently travel up the north-east corridor, so if you live
anywhere between here and Burlington, VT, I am willing to deliver if you
can
wait until March or so. Otherwise, perhaps we can make arrangements.

Some photos are posted here:
_
pic/list_
()

851_1.jpg A screen shot of the analyzer showing the FM band with a
dangling
wire antenna and the input attenuator at 0 dB. Harmonic n=1. LO signal on
left.
851_2.jpg A 1 dBm, 2.4 GHz signal at the input with RF attenuation set to
30
dB. n=2.
851_3.jpg Same signal displayed on band 4, which uses the 200 MHz IF,
n=1.
851_4.jpg The FM band again, displayed on the orange-screened 851B.

I would prefer not to part this instrument out, and to send all of it to a
good, loving home. Please make me an offer. I don't have a good feel for
price of this instrument particularly since shipping would normally be a
dominant part of the cost. Alternatively I am willing to trade for any of
the instruments below, in working or *repairable* condition. Of the
highest
interest are any of the 141T SA plug-ins listed.

Any 8554/8555/8556 SA plug-ins for a 141T based spectrum analyzer,
preferably in grey paint.
182T mainframe
any 11664 A or B detectors
a 8755C swept amplitude analyzer
a sweeper covering ~MHz to ~2.5 GHz.

So, if interested, please contact me off-list and let's discuss. Thanks
and
Happy Holidays!

Dan

851B/8551B Spectrum analyzer.
----------------------------
8551B: SN 625-00695 (RF unit)
851B: SN 526-00805 (Orange screen)
851B: SN 526-00339 (spare unit)

What works:
Mixer, at least at n=1, n=2 and n=3. I don't have sources to test higher
harmonics.
RF input attenuator
Stabilized fine tune - with some care
Trace centering is fine at or below 1 mc/cm, alowing one to quickly zoom
in
on a signal.
Both 851B display units, with sharp and bright traces.
Fine and course tuning
Frequency vernier

What doesn't work:
Trace centering on the 3-300 MC/cm scales.
The signal jumps around when switching scales, though it can still be
tuned.
I can't follow the manual procedure in section 3-34 to set the spectrum
centering
adjustment on the front panel. The tracking meter does not respond as it
should.
As a result, LO scale pointer is ~100 MC off on scales at or below the 1
mc/cm sweep and
varies on the 3-300 mc/cm scales.
May need to reglue the scale drum at some point, but it's ok for now
The orange plastic filter in one of the 851s has cracks in it in the lower
left corner just off scale.
The tune knob had it's handle broken off, but I kept the original parts
and
was able to
epoxy together a decent looking reconstruction, so it works now and looks
ok.
I can't figure out if the signal identifier works. It's supposed to shift
the signal by n cm at 100 KC/cm,
which it does, but when you press the "reference" knob, it should revert
to
the n=1 state.
But instead the trace keeps moving off screen. I suspect this is related
to
the issues at large spans.

What you get:
A functional piece of history - the first calibrated spectrum analyzer
from
HP.
A basic, working spectrum analyzer
All interconnecting cables and oval power cords
One ORIGINAL PAPER MANUAL for the 851B display section
A spare 851B display unit (the orange one was originally paired with the
8551, judging from the stickers)
Satisfaction of working with a wonderful instrument
Herniated disks

What you don't get:
Any of the sources shown in the pictures
The instrument rack, though that can be negotiated separately
The 50 Ohm terminator on the back at the LO output. I only have a few of
these and I need them,
however it seems to work ok without it at the few frequencies I looked at.
Paper manuals for the 8551B section - but these are available on-line.
The right to return the instrument
Medical insurance

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links






[Non-text portions of this message have been removed]

Join HP-Agilent-Keysight-equipment@groups.io to automatically receive all group messages.