A DC measurement across the output connector should show infinity, which is a good sign, as it shows that neither the 2 caps. nor the coax-cable are shorted. The caps. are in series with the pick-up loop, the resistors and the centre of the coax-cable.
Merchison
toggle quoted message
Show quoted text
On 2012-12-23 12:34 AM, Max Robinson wrote:
A DC measurement across the output connector should show
53 ohms. I know this is not a standard value but that is what the diagram
says. My 608 shows infinity. That's not a good sign.
Regards.
Max. K 4 O DS.
