开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

Re: HP-608A Repair


Bob Albert
 

I think the oscillator is okay but I will take another look. If it's weak I'd expect no output on some frequencies, which isn't happening.

Bob

--- On Fri, 12/21/12, Ken Greenough <g0wbm@...> wrote:

From: Ken Greenough <g0wbm@...>
Subject: Re: [hp_agilent_equipment] HP-608A Repair
To: hp_agilent_equipment@...
Date: Friday, December 21, 2012, 12:05 PM

? ----- Original Message -----
? From: Bob Albert
? To: hp_agilent_equipment@...

? Sent: Friday, December 21, 2012 6:02 PM
? Subject: Re: [hp_agilent_equipment] HP-608A Repair


? ?
? I am having attenuator problems also, with a Marconi
TF1066/4. The attenuator rack, made of plastic, had broken
because the generator had been removed from the case
carelessly. I repaired it with epoxy and the repair looks
very good. The attenuator moves smoothly and works well.

? However, the calibration is wrong. The output from
the generator is about 10dB less than the attenuator says.
The pickup coil is as far into the tube as it will go; any
farther and it contacts the coil. There is no means I can
see for rotating the pickup coil, so I am puzzled as to why
the output is low.

? I tried increasing the carrier level, assuming that
wasn't calibrated, but even at maximum the output is several
dB below the dial reading.

? Any ideas? This is a true boat anchor, and is way too
big and heavy for what it does. I want to get it working
properly so I can see about selling it. It has many great
features, and covers from 10 to 470 MHz, AM and FM and so
on. And it's a nice looking unit, with two big circular
dials with two pretty meters and light blue control knobs.

? Bob

? Hello Bob,

? Have you checked that the valves [ tubes] are in full
working order?

? If you're getting low output from the oscillator then
there's nothing the

? attenuator can do to compensate.

? 73 Ken g8beq

? Sorry to the group for the previous mail, I caught
send before I was ready.

? Happy Christmas to all.

?

[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links


? ? hp_agilent_equipment-fullfeatured@...

Join [email protected] to automatically receive all group messages.