That cabinet design is known as System I, as are the feet,
but the only size that's commonly available is the single.
The seven-inch bar for the 1/3-wide cabinet is rare; I'm
also looking for two for my 5210A Frequency Meter.
In the meantime we can use generic stick-ons, but we'll
have to do without the bail.
Dave Wise
toggle quoted message
Show quoted text
-----Original Message-----
From: hp_agilent_equipment@...
[mailto:hp_agilent_equipment@...]On Behalf Of ArtekMedia
Sent: Thursday, September 24, 2009 3:56 AM
To: hp_agilent_equipment@...
Subject: Foot Assy for (Re: [hp_agilent_equipment] 7562A Log
Voltmeter/Converter)
These had a "front bail/foot" type front #1490-0032 and the
rear foot
was #5060-0728 built in the late 60's and early 70's
...probably common
to other gear of that era
Dave & Lynn Henderson
ArtekMedia
Out-of-Print Technical Manuals
www.ArtekMedia.com
manuals@...
651-269-4265
David C. Partridge wrote:
OK, these now look like project boxes to me, and very nice
ones too, as they
would appear to have spent their life in a rack unit, so
aren't bashed
around!
I would rather like some feet for them (they were in a rack
adapter).
Each instrument originally had two feet (one at the front,
one at the back).
The feet are a plastic bar about 7" long and 3/4" wide with
detents at the
ends for a bail bar, and a push button in the middle with
instructions
"Press then slide foot".
