Re: BNC that does not have the bayonet lugs
|
How about a Push-On BNC connector
Hi Dave thank you I have both the? SHV and the MHV? connecters that are the size of the BNC connecters? but they all have the Bayonet lugs on them
The connecters I want are the size of the above but without the Bayonet lugs and connect together as a push fit without twisting and to release you pull the outer ring back
Regards Paul
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dave McGuire via
Sent: 21 May 2025 01:59
To: [email protected]
Subject: Re: [HP-Agilent-Keysight-equipment] BNC that does not have the bayonet lugs
? ?There's another one, called "SHV".? It's common in the world of lasers and particle physics.
? ? ? ? ? ? ? ? -Dave
On 5/20/25 20:36, Bill Carver wrote:
> High voltage BNC = "MHV" connector. I used it in RG8 for 3.5
> KV-and-ground? to tube amplifier.
> W7AAZ
>
>
> On 5/20/2025 3:39 PM, Mike via wrote:
>> SHV?
>>
>>
>> 73, Mike,
>>
>> Mike Stevens,
>>
>> G8CUL/F4VRB.
>>
>>
>> From: [email protected]
>> <[email protected]> On Behalf Of Paul Bicknell
>> via
>> Sent: 20 May 2025 22:05
>> To: [email protected]
>> Subject: [HP-Agilent-Keysight-equipment] BNC that does not have the
>> bayonet lugs
>>
>>
>> Hi all a bit off base? but has anyone ever come across a connector
>> that is the same size and form as a BNC but it does not have the
>> bayonet lugs and uses a locking grove where the lugs would be? it is
>> Made by Radial? and there is even a High voltage version with more
>> insulation like the high voltage BNC? as I would like to get hold of
>> a few mating sets
>>
>> Regards Paul? located in the? UK
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
--
Dave McGuire, AK4HZ
New Kensington, PA
|
