I have the older and smaller models that can only print up to 18mm. I
see the new ones can print up to ~1" but I guess the tapes are the 24mm
ones.
I wanted to get something as close as possible to the original ones that
fit perfectly between the edges of the backside cover.
I tried a spreadsheet that has the printable area exactly the size I
need and I printed it on a slightly larger label and after that I cut it
precisely to the size needed. It does not look good since it is on
thermal label paper but it is OK until I find something better.
Another option is to add a tag near the connector and the sticker with
the calibration values will be attached to the tag.
I would be interested if someone knows anyone in a cal lab to know how
they do it, what labels they use, what printers they use...
In the Agilent N8480 User's Guide there is a part number for the
backside cal table: N8481-84305 but of course I guess Keysight will not
sell it now...
toggle quoted message
Show quoted text
On 13/04/2025 21:40, Sergey Kubushyn via groups.io wrote:
On Sun, 13 Apr 2025, Razvan Popescu via groups.io wrote:
P-touch can print up to 1" wide tape, at least those 2 printers I have here
can.
You can't create such a label with the printer itself but it is easy using
their application that allows you to create label with arbitrary fonts and
graphics. It can make a label with text ACROSS the tape, not along it.
