Re: Threads for screws on 8656 Siggen
|
UNOFFICIAL
?
I misread the parts list and thought it was 5/32. 3MM is too small , 4mm is too big, 5/32 BSW doesn't screw in
?
|
Wayne Eckert BEng
Observing Operations Hub Sydney
M:0409986684
|
|
T: 02 92961668
Unit 9 ?111 Moore Street
Leichhardt NSW 2040
wayne.eckert@... |
|
?
?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]>
On Behalf Of 搁别苍é别 via groups.io
Sent: Tuesday, 18 March 2025 1:59 PM
To: [email protected]
Subject: Re: [HP-Agilent-Keysight-equipment] Threads for screws on 8656 Siggen
?
M3.5x.6
搁别苍é别
On 3/17/25 10:57 AM, Bill Carver via groups.io wrote:
Maybe I have the same problem as the 8656: the cover screws for the 8643 is NOT 6-32 (USA, national coarse), nor is it 6-40 (USA, national fine). The diameter is very close to USA #6, a finer thread than 32 threads per inch. It has to be
some metric size that the local specialty guy did not recognize.
Thank you Goran for the idea of looking at the parts list. I will try to find an 8643 manual on line somewhere and see what it says.
Bill
On 3/17/2025 5:17 AM, G?ran Krusell via groups.io wrote:
p. 6-36. 4 * MP101, 6-32.
G?ran
?
|
