|
Sorry I couldn't be of much help, Keith.? Say, now I'm curious, what kind of components do those E reference designators stand for?? The only time I've seen that used was at Powerwave (now out of business) where they were solder connection points for coaxial cables.? Are those ferrite beads or something?? Enquiring minds want to know!???? Jim
On Sunday, October 6, 2024 at 08:02:49 PM CDT, Yves Tardif <yves_tardif@...> wrote:
Hi Keith, ? This is some pictures from my 34465A. ? Yves De?: [email protected] <[email protected]> De la part de Keith Harvey ? Hi Jim, ? Thank you for the insight and offer to assist. ? The unit I have has some burned components on the main PCB. If I send a list of the silkscreen component designations, can you open one up and determine the manufacturer part numbers? ? I'm one of those people who refuses to pay an outrageous sum to replace the entire board when a few dollars of replaceable components are the only thing necessary to make the device functional, again. ? Just in case you are able and willing to do this, I've included the component designations: ? CR1008 E1005 Q1003 U1005 E1002 ? I've also attached pictures of the locations of these components. ? BTW: "No" is an acceptable response. ? Regards, Keith Harvey ? From: [email protected] <[email protected]> on behalf of Jim Ford <james.ford@...>
Sent: Saturday, October 5, 2024 4:56 PM To: [email protected] <[email protected]> Subject: Re: [HP-Agilent-Keysight-equipment] Agilent 34461A schenmatic ? Keith, that one is probably too new to have a schematic available.? Blame the suits at HPAK and everywhere else for that.? BTW, we have several of the 34461A DMMs around Raytheon where I work, so if you have a question about how to operate it, or is it supposed to do this, or whatever, I'm happy to check it out on one of the ones at work.? HTH. ? Jim Ford Laguna Hills California USA ? On Saturday, October 5, 2024 at 03:41:04 PM CDT, Keith Harvey <keithh534@...> wrote: ? ? Greetings, ? Does anyone know where I might obtain a full schematic for the Agilent 34461A? ? TIA, Keith Harvey |
