Pay especial attention to the alphabet soup past the part number, and for that manufacturer, try to track it down to a specific outline in the data sheet.? Not all manufacturers give you a link to a specific JEDC standard part outline, so sometimes it's needed to go to the mechanical drawing.
Annoying at best.
Once you have a board design, note on the schematic or board the specific part, or using a specific part, make sure that the notes give the complete part number and equivalent outline/package.
Yep, annoying.
Harvey
toggle quoted message
Show quoted text
On 6/13/2024 2:15 AM, Anders wrote:
That problem has bitten me numerous times in the past. What I try to do is to order the chips, then print out the layout on paper ans place the chips to check the spacing.
