Re: 11048C feed through termination data?
|
Still works OK, in spite of .010 inch delta, but the point of my statement was the refute the "apparent" inferiority of the BNC. However, we can quibble, as all seem to feel the need. J. Kruth
In a message dated 3/24/2024 10:50:28 AM Eastern Standard Time, robert8rpi@... writes:
?
50R BNC / TNC and 50R N types have the same outer conductor inner diameter and center conductor outer diameter BUT the tapered and reduced pin diameter is larger on N types than BNC / TNC . Thus while you can push a N male into a BNC or TNC female it will stress the female contact and my cause permanent deformation depending on the exact connectors.
BNC / TNC female is designed to mate with a 0.052 to 0/053" diameter pin Ntype is 0.063-0.066" diameter.
See MIL-A-55339A
Robert G8RPI.
|
