Re: HP 16500C looking for logic analyser boards that are functional
|
I have two things. The users reference and the programmers guide. From what I can glean in the users reference it should pop up some sort of programing interface via telnet.? From the user guide,?
"? Telnet or ftp: Initiate a session from your controlling computer. If you are
using telnet, be sure to specify socket 5025. If you are using ftp, log in as
control."?
"Telnet: Type programming commands in directly."?
It will also remote xterm but it seemed simpler just to get Telnet going first. I wonder if that functionality needed to come off something that needs to be installed via disk. The programming guide seems to imply one is sitting in a terminal and able to issue various instructions. Contains example code to feed it.?
On Tue, Nov 21, 2023 at 11:03?AM Adrian Godwin < artgodwin@...> wrote: I think the 16700 and possibly the 16600, which run HPUX on a PA-RISC processor have a telnet client but not the 16500.
It does have some open ports but they don't respond to what i've tried (SCPI commands).
Something I saw while looking for strings in the binary system files indicated they might provide an RPC interface.
|
