Hello Michael,
looks to me it is "M" medium acting
fuse...
for the 200W model (654xA and 664xA) 5A
for the 500W model 12A...
- You need 5A Medium acting fuse
(without marking; there should be no
"F" or "T")
Istvan
2023. 11. 13. 22:31 keltezéssel,
Michael Yellin írta:
toggle quoted message
Show quoted text
Hello All,
I recently obtained two HP 6643A units, one working, and the other
not working.? I started to troubleshoot the broken one, my first
step was checking the Mains fuse, in the service manual known as
F450.? When I check the specs in the manual, it conflicts in some
places, as well as not providing all the needed information.
First, in two places, it states that the fuse should be a 12amp
fuse for 120 Volt operation, while in another place, it indicates
a 5amp fuse for 120 volt operation. (See below) The popped fuse I
removed was a 5amp fuse.? I then checked the working unit, and it
also had a 5 amp fuse.? Last, no where does it mention the
physical size of the fuse (I measured it at 32mm by 12mm or 1.25
in by .25 in.) nor does it mention whether it should be fast or
slow acting,
Can anyone provide any guidence?
TIA
Michael
