Check the manual backdating changes to see if there was any change in the CPU or other boards , sometimes HP upgraded processor boards due to obsolence of certain parts used and as a result newer firmware sometimes was not compatible to older CPU boards
toggle quoted message
Show quoted text
-----Original Message-----
From:
[email protected] <
[email protected]> On Behalf Of Yves Tardif via groups.io
Sent: Monday, March 21, 2022 4:34 PM
To:
[email protected]Subject: Re: [HP-Agilent-Keysight-equipment] HP83595A/B (HP 8350) ROM firmware required
Hi,
I downloaded version 9 for the 83595A plugin on the KO4BB site as suggested, but there is a problem, this firmware is not recognized by the plugin.
I had the version 3 of the firmware, corresponding to the following numbers: 83595-80001 for U1 and 83595-80002 for U2.
The version 9 would correspond to the numbers: 83595-0019 and 83595-80020.
I found on the same site but in a different directory, the version 4 of the firmware which works very well: 83595-80003 and 83595-80004.
If I do a search on the Keysight site, it is possible to find by the part numbers, the version 3 and 4 of the firmware, but nothing more.
Has anyone already installed a version more recent than version 4 on this plugin?
-Yves
-----Message d'origine-----
De :
[email protected] <
[email protected]> De la part de Dave McGuire Envoy¨¦ : 18 mars 2022 22:09 ? :
[email protected]Objet : Re: [HP-Agilent-Keysight-equipment] HP83595A/B (HP 8350) ROM firmware required
If you don't need version 7 specifically, version 9 for 83595 is available from the KO4BB archive:
-Dave
