Hi Ruben,
Glad it helps, I've attached the cross reference for T1 part numbers
from my manual (which you may already have) and a scan of the A6
board main fold-out from the manual as well, I've not compared it
with the change-note version I sent earlier so I don't know if it is
relevant but I thought a non-blurred copy may be useful anyway!
Are you in the UK? I'm based near Cambridge.
Adrian
On 03/02/2022 15:27, RubenRubio wrote:
toggle quoted message
Show quoted text
Thanks Adrian! That helps a lot, my schematics are blurred!
I am a bit confused now, reading the ratings of fuses in A17 and
A18 boards from 8566B SA. The current figures are low, specially
for the 10 and 5 volt rails, even considering the size of the
transformer (it looks bigger than mine). I am lost at this
point.?
Maybe the 8566B main transforme could be swapable to my 8350B...
but I am not sure, looking only the fuses ratings in both
machines (I attached the tables). Maybe the transformer could do
the job because overdimension or maybe not. Also depending the
way to connect windings can help to feed enought current.
Opinions?
Attachments:
