tmillermdems wrote on 10/2/2021 7:31 PM:
0.002 inch ss feeler gauge stock.
On 10/2/2021 6:54 PM, John wrote:
I repaired my 8662 key switches with feeler gauge material cut down to the size I needed. I forget the thickness but you can match that to the existing springs and it should be ok.
Hello--
Here are the spring's dimensions (attached). If you can't locate a source of the 0.002-inch
shim stock material, you may have to sacrifice a leaf from a feeler gauge ($5.00 or thereabouts)
HTH, and 73--
Brad? AA1IP
