John, here's an image right after start up with nothing connected. I believe it's the same as Siggi's post (apart from the unlock):
Here are also a series of images looking at the cal signal. Clearly it's way off and I wouldn't have expected all those spurs, but then that's just a guess. The frequency as reported by my oscilloscope is as close to 100MHz as I can measure and the output power is reading -10dBm. Obviously, because I'm seeing the signal at 80MHz, I couldn't zoom in to far to 100MHz. But, when I started zooming in to 80MHz, I could still see the signal clearly at a 10MHz span, but at 5MHz span it disappeared entirely. Hope this is helpful and happy to keep posting these images.
Also, it's good to hear that I should be checking voltages and caps before tuning anything. I think I may have misunderstood some of the previous notes.
