Is that the same size as the knobs on the
HP 6236Bpower supplies? I am missing knobs and the inserts on several of these. Also, has anyone made replacements for the meter bezels for these? I can't access my manuals right now, I am still working to complete repairs after I lost the neutral from the street and fried a lot of equipment. I currently have lights and a window A/C in one room, or I would look .up the part numbers. Also, I ended up with limited data on Hughesnet, after Spectrum refused to restor my service. The open neutral fried their coax drop when it tried to carry the Neutral current. I heard burning MOVs and tripping breakers before the house went dark. It looks like several thousand dollars worth of damage to the wiring and equipment. I was off line for about two months.
On Sun, Sep 6, 2020 at 11:17 AM Dave McGuire <
mcguire@...> wrote:
? ?Oh!? A very good picture.? Thanks!? The 0370-2188 knob is the second
from the right on the top, under the words "FREQUENCY" and "SPAN", the
smaller front-most knob for the inner shaft. (not the one with the
protruding handle and labeled skirt)
? ?The 0370-3013 knob is in the bottom row immediate to the right of the
noise source output BNC connector, again the smaller front-most knob for
the inner shaft.
? ?The "cap" that I need is the one that snaps into the front of the
intensity knob.
? ? ? ? ? ? ? ? -Dave
On 9/6/20 1:36 AM, f1ghb wrote:
> Hello Dave,
>
> I may have these knobs and front cap but I was not able to identify them
> on a picture of a 3582A , for example here :
>
>
>
> Cold you identify them on the picture
>
> Best regards
> Eric
>
> Le 06/09/2020 00:26, Dave McGuire a ¨¦crit :
>>
>> ? If anyone has any available, I'd like to purchase the following
>> knobs.? My application is for a 3582A, but they were used on other
>> instruments.
>>
>> ? 0370-2188?? "frequency mode" on the 3582A
>> ? 0370-3013?? "noise source level" on the 3582A
>>
>> ? ...and just the little front cap for an 0370-1005, which is probably
>> the same as for many other knobs.? It's about 5/16" in diameter.
>>
>> ? Anybody gots?
>>
>> ???????????? -Dave
>>
>
>
>
>
--
Dave McGuire, AK4HZ
New Kensington, PA
Michael A. Terrell